您最多选择25个主题 主题必须以中文或者字母或数字开头,可以包含连字符 (-),并且长度不得超过35个字符
 
 
 
 

330 行
14 KiB

//-----------------------------------------------------------------------------
// LightLoop
// ----------------------------------------------------------------------------
void ApplyDebug(LightLoopContext lightLoopContext, float3 positionWS, inout float3 diffuseLighting, inout float3 specularLighting)
{
#ifdef DEBUG_DISPLAY
if (_DebugLightingMode == DEBUGLIGHTINGMODE_DIFFUSE_LIGHTING)
{
specularLighting = float3(0.0, 0.0, 0.0); // Disable specular lighting
}
else if (_DebugLightingMode == DEBUGLIGHTINGMODE_SPECULAR_LIGHTING)
{
diffuseLighting = float3(0.0, 0.0, 0.0); // Disable diffuse lighting
}
else if (_DebugLightingMode == DEBUGLIGHTINGMODE_VISUALIZE_CASCADE)
{
specularLighting = float3(0.0, 0.0, 0.0);
const float3 s_CascadeColors[] = {
float3(1.0, 0.0, 0.0),
float3(0.0, 1.0, 0.0),
float3(0.0, 0.0, 1.0),
float3(1.0, 1.0, 0.0)
};
float shadow = GetDirectionalShadowAttenuation(lightLoopContext.shadowContext, positionWS, float3(0.0, 1.0, 0.0 ), 0, float3(0.0, 0.0, 0.0), float2(0.0, 0.0));
float4 dirShadowSplitSpheres[4];
uint payloadOffset = EvalShadow_LoadSplitSpheres(lightLoopContext.shadowContext, 0, dirShadowSplitSpheres);
int shadowSplitIndex = EvalShadow_GetSplitSphereIndexForDirshadows(positionWS, dirShadowSplitSpheres);
if (shadowSplitIndex == -1)
{
diffuseLighting = float3(0.0, 0.0, 0.0);
}
else
{
diffuseLighting = s_CascadeColors[shadowSplitIndex] * shadow;
}
}
#endif
}
#ifdef LIGHTLOOP_TILE_PASS
// Calculate the offset in global light index light for current light category
int GetTileOffset(PositionInputs posInput, uint lightCategory)
{
uint2 tileIndex = posInput.unTileCoord;
return (tileIndex.y + lightCategory * _NumTileFtplY) * _NumTileFtplX + tileIndex.x;
}
void GetCountAndStartTile(PositionInputs posInput, uint lightCategory, out uint start, out uint lightCount)
{
const int tileOffset = GetTileOffset(posInput, lightCategory);
// The first entry inside a tile is the number of light for lightCategory (thus the +0)
lightCount = g_vLightListGlobal[DWORD_PER_TILE * tileOffset + 0] & 0xffff;
start = tileOffset;
}
#ifdef USE_FPTL_LIGHTLIST
uint GetTileSize()
{
return TILE_SIZE_FPTL;
}
void GetCountAndStart(PositionInputs posInput, uint lightCategory, out uint start, out uint lightCount)
{
GetCountAndStartTile(posInput, lightCategory, start, lightCount);
}
uint FetchIndex(uint tileOffset, uint lightIndex)
{
const uint lightIndexPlusOne = lightIndex + 1; // Add +1 as first slot is reserved to store number of light
// Light index are store on 16bit
return (g_vLightListGlobal[DWORD_PER_TILE * tileOffset + (lightIndexPlusOne >> 1)] >> ((lightIndexPlusOne & 1) * DWORD_PER_TILE)) & 0xffff;
}
#elif defined(USE_CLUSTERED_LIGHTLIST)
#include "ClusteredUtils.hlsl"
uint GetTileSize()
{
return TILE_SIZE_CLUSTERED;
}
void GetCountAndStartCluster(PositionInputs posInput, uint lightCategory, out uint start, out uint lightCount)
{
uint2 tileIndex = posInput.unTileCoord;
float logBase = g_fClustBase;
if (g_isLogBaseBufferEnabled)
{
logBase = g_logBaseBuffer[tileIndex.y * _NumTileClusteredX + tileIndex.x];
}
int clustIdx = SnapToClusterIdxFlex(posInput.depthVS, logBase, g_isLogBaseBufferEnabled != 0);
int nrClusters = (1 << g_iLog2NumClusters);
const int idx = ((lightCategory * nrClusters + clustIdx) * _NumTileClusteredY + tileIndex.y) * _NumTileClusteredX + tileIndex.x;
uint dataPair = g_vLayeredOffsetsBuffer[idx];
start = dataPair & 0x7ffffff;
lightCount = (dataPair >> 27) & 31;
}
void GetCountAndStart(PositionInputs posInput, uint lightCategory, out uint start, out uint lightCount)
{
GetCountAndStartCluster(posInput, lightCategory, start, lightCount);
}
uint FetchIndex(uint tileOffset, uint lightIndex)
{
return g_vLightListGlobal[tileOffset + lightIndex];
}
#endif // USE_FPTL_LIGHTLIST
#else
uint GetTileSize()
{
return 1;
}
#endif // LIGHTLOOP_TILE_PASS
// bakeDiffuseLighting is part of the prototype so a user is able to implement a "base pass" with GI and multipass direct light (aka old unity rendering path)
void LightLoop( float3 V, PositionInputs posInput, PreLightData preLightData, BSDFData bsdfData, BakeLightingData bakeLightingData, uint featureFlags,
out float3 diffuseLighting,
out float3 specularLighting)
{
LightLoopContext context;
context.sampleReflection = 0;
context.shadowContext = InitShadowContext();
// This struct is define in the material. the Lightloop must not access it
// PostEvaluateBSDF call at the end will convert Lighting to diffuse and specular lighting
AggregateLighting aggregateLighting;
ZERO_INITIALIZE(AggregateLighting, aggregateLighting); // LightLoop is in charge of initializing the struct
uint i = 0; // Declare once to avoid the D3D11 compiler warning.
if (featureFlags & LIGHTFEATUREFLAGS_DIRECTIONAL)
{
for (i = 0; i < _DirectionalLightCount; ++i)
{
DirectLighting lighting = EvaluateBSDF_Directional(context, V, posInput, preLightData, _DirectionalLightDatas[i], bsdfData, bakeLightingData);
AccumulateDirectLighting(lighting, aggregateLighting);
}
}
if (featureFlags & LIGHTFEATUREFLAGS_PUNCTUAL)
{
#ifdef LIGHTLOOP_TILE_PASS
// TODO: Convert the for loop below to a while on each type as we know we are sorted and compare performance.
uint punctualLightStart;
uint punctualLightCount;
GetCountAndStart(posInput, LIGHTCATEGORY_PUNCTUAL, punctualLightStart, punctualLightCount);
for (i = 0; i < punctualLightCount; ++i)
{
int punctualIndex = FetchIndex(punctualLightStart, i);
DirectLighting lighting = EvaluateBSDF_Punctual(context, V, posInput, preLightData, _LightDatas[punctualIndex], bsdfData, bakeLightingData, _LightDatas[punctualIndex].lightType);
AccumulateDirectLighting(lighting, aggregateLighting);
}
#else
for (i = 0; i < _PunctualLightCount; ++i)
{
DirectLighting lighting = EvaluateBSDF_Punctual(context, V, posInput, preLightData, _LightDatas[i], bsdfData, bakeLightingData, _LightDatas[i].lightType);
AccumulateDirectLighting(lighting, aggregateLighting);
}
#endif
}
if (featureFlags & LIGHTFEATUREFLAGS_AREA)
{
#ifdef LIGHTLOOP_TILE_PASS
uint areaLightStart;
uint areaLightCount;
GetCountAndStart(posInput, LIGHTCATEGORY_AREA, areaLightStart, areaLightCount);
// COMPILER BEHAVIOR WARNING!
// If rectangle lights are before line lights, the compiler will duplicate light matrices in VGPR because they are used differently between the two types of lights.
// By keeping line lights first we avoid this behavior and save substantial register pressure.
// TODO: This is based on the current Lit.shader and can be different for any other way of implementing area lights, how to be generic and ensure performance ?
i = 0;
if (areaLightCount > 0)
{
uint areaIndex = FetchIndex(areaLightStart, 0);
uint lightType = _LightDatas[areaIndex].lightType;
while (i < areaLightCount && lightType == GPULIGHTTYPE_LINE)
{
DirectLighting lighting = EvaluateBSDF_Area(context, V, posInput, preLightData, _LightDatas[areaIndex], bsdfData, bakeLightingData, GPULIGHTTYPE_LINE);
AccumulateDirectLighting(lighting, aggregateLighting);
i++;
areaIndex = i < areaLightCount ? FetchIndex(areaLightStart, i) : 0;
lightType = i < areaLightCount ? _LightDatas[areaIndex].lightType : 0xFF;
}
while (i < areaLightCount && lightType == GPULIGHTTYPE_RECTANGLE)
{
DirectLighting lighting = EvaluateBSDF_Area(context, V, posInput, preLightData, _LightDatas[areaIndex], bsdfData, bakeLightingData, GPULIGHTTYPE_RECTANGLE);
AccumulateDirectLighting(lighting, aggregateLighting);
i++;
areaIndex = i < areaLightCount ? FetchIndex(areaLightStart, i) : 0;
lightType = i < areaLightCount ? _LightDatas[areaIndex].lightType : 0xFF;
}
}
#else
for (i = _PunctualLightCount; i < _PunctualLightCount + _AreaLightCount; ++i)
{
DirectLighting lighting = EvaluateBSDF_Area(context, V, posInput, preLightData, _LightDatas[i], bsdfData, bakeLightingData, _LightDatas[i].lightType);
AccumulateDirectLighting(lighting, aggregateLighting);
}
#endif
}
float reflectionHierarchyWeight = 0.0; // Max: 1.0
float refractionHierarchyWeight = 0.0; // Max: 1.0
if (featureFlags & LIGHTFEATUREFLAGS_SSREFRACTION)
{
IndirectLighting lighting = EvaluateBSDF_SSRefraction(context, V, posInput, preLightData, bsdfData, refractionHierarchyWeight);
AccumulateIndirectLighting(lighting, aggregateLighting);
}
if (featureFlags & LIGHTFEATUREFLAGS_SSREFLECTION)
{
IndirectLighting lighting = EvaluateBSDF_SSReflection(context, V, posInput, preLightData, bsdfData, reflectionHierarchyWeight);
AccumulateIndirectLighting(lighting, aggregateLighting);
}
if (featureFlags & LIGHTFEATUREFLAGS_ENV || featureFlags & LIGHTFEATUREFLAGS_SKY)
{
// Reflection probes are sorted by volume (in the increasing order).
if (featureFlags & LIGHTFEATUREFLAGS_ENV)
{
context.sampleReflection = SINGLE_PASS_CONTEXT_SAMPLE_REFLECTION_PROBES;
#ifdef LIGHTLOOP_TILE_PASS
uint envLightStart;
uint envLightCount;
GetCountAndStart(posInput, LIGHTCATEGORY_ENV, envLightStart, envLightCount);
#else
uint envLightCount = _EnvLightCount;
#endif
// Note: In case of IBL we are sorted from smaller to bigger projected solid angle bounds. We are not sorted by type so we can't do a 'while' approach like for area light.
for (i = 0; i < envLightCount && reflectionHierarchyWeight < 1.0; ++i)
{
#ifdef LIGHTLOOP_TILE_PASS
uint envLightIndex = FetchIndex(envLightStart, i);
#else
uint envLightIndex = i;
#endif
IndirectLighting lighting = EvaluateBSDF_Env( context, V, posInput, preLightData, _EnvLightDatas[envLightIndex], bsdfData, _EnvLightDatas[envLightIndex].envShapeType,
GPUIMAGEBASEDLIGHTINGTYPE_REFLECTION, reflectionHierarchyWeight);
AccumulateIndirectLighting(lighting, aggregateLighting);
}
// Refraction probe and reflection probe will process exactly the same weight. It will be good for performance to be able to share this computation
// However it is hard to deal with the fact that reflectionHierarchyWeight and refractionHierarchyWeight have not the same values, they are independent
// The refraction probe is rarely used and happen only with sphere shape and high IOR. So we accept the slow path that use more simple code and
// doesn't affect the performance of the reflection which is more important.
// We reuse LIGHTFEATUREFLAGS_SSREFRACTION flag as refraction is mainly base on the screen. Would be aa waste to not use screen and only cubemap.
if (featureFlags & LIGHTFEATUREFLAGS_SSREFRACTION)
{
for (i = 0; i < envLightCount && refractionHierarchyWeight < 1.0; ++i)
{
#ifdef LIGHTLOOP_TILE_PASS
uint envLightIndex = FetchIndex(envLightStart, i);
#else
uint envLightIndex = i;
#endif
IndirectLighting lighting = EvaluateBSDF_Env( context, V, posInput, preLightData, _EnvLightDatas[envLightIndex], bsdfData, _EnvLightDatas[envLightIndex].envShapeType,
GPUIMAGEBASEDLIGHTINGTYPE_REFRACTION, refractionHierarchyWeight);
AccumulateIndirectLighting(lighting, aggregateLighting);
}
}
}
// Only apply the sky IBL if the sky texture is available
if (featureFlags & LIGHTFEATUREFLAGS_SKY && _EnvLightSkyEnabled)
{
// Only apply the sky if we haven't yet accumulated enough IBL lighting.
if (reflectionHierarchyWeight < 1.0)
{
// The sky is a single cubemap texture separate from the reflection probe texture array (different resolution and compression)
context.sampleReflection = SINGLE_PASS_CONTEXT_SAMPLE_SKY;
EnvLightData envLightSky = InitSkyEnvLightData(0); // The sky data are generated on the fly so the compiler can optimize the code
IndirectLighting lighting = EvaluateBSDF_Env(context, V, posInput, preLightData, envLightSky, bsdfData, ENVSHAPETYPE_SKY, GPUIMAGEBASEDLIGHTINGTYPE_REFLECTION, reflectionHierarchyWeight);
AccumulateIndirectLighting(lighting, aggregateLighting);
}
if (featureFlags & LIGHTFEATUREFLAGS_SSREFRACTION)
{
if (refractionHierarchyWeight < 1.0)
{
// The sky is a single cubemap texture separate from the reflection probe texture array (different resolution and compression)
context.sampleReflection = SINGLE_PASS_CONTEXT_SAMPLE_SKY;
EnvLightData envLightSky = InitSkyEnvLightData(0); // The sky data are generated on the fly so the compiler can optimize the code
IndirectLighting lighting = EvaluateBSDF_Env(context, V, posInput, preLightData, envLightSky, bsdfData, ENVSHAPETYPE_SKY, GPUIMAGEBASEDLIGHTINGTYPE_REFRACTION, refractionHierarchyWeight);
AccumulateIndirectLighting(lighting, aggregateLighting);
}
}
}
}
// Also Apply indiret diffuse (GI)
// PostEvaluateBSDF will perform any operation wanted by the material and sum everything into diffuseLighting and specularLighting
PostEvaluateBSDF( context, V, posInput, preLightData, bsdfData, bakeLightingData, aggregateLighting,
diffuseLighting, specularLighting);
ApplyDebug(context, posInput.positionWS, diffuseLighting, specularLighting);
}