Training on Amazon Web Service

This page contains instructions for setting up an EC2 instance on Amazon Web Service for training ML-Agents environments.

Preconfigured AMI

We've prepared an preconfigured AMI for you with the ID: ami-18642967 in the us-east-1 region. It was created as a modification of Deep Learning AMI (Ubuntu). If you want to do training without the headless mode, you need to enable X Server on it. After launching your EC2 instance using the ami and ssh into it, run the following commands to enable it:

//Start the X Server, press Enter to come to the command line
$ sudo /usr/bin/X :0 &

//Check if Xorg process is running
//You will have a list of processes running on the GPU, Xorg should be in the list, as shown below
$ nvidia-smi
/*
 * Thu Jun 14 20:27:26 2018
 * +-----------------------------------------------------------------------------+
 * | NVIDIA-SMI 390.67                 Driver Version: 390.67                    |
 * |-------------------------------+----------------------+----------------------+
 * | GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
 * | Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
 * |===============================+======================+======================|
 * |   0  Tesla K80           On   | 00000000:00:1E.0 Off |                    0 |
 * | N/A   35C    P8    31W / 149W |      9MiB / 11441MiB |      0%      Default |
 * +-------------------------------+----------------------+----------------------+
 *
 * +-----------------------------------------------------------------------------+
 * | Processes:                                                       GPU Memory |
 * |  GPU       PID   Type   Process name                             Usage      |
 * |=============================================================================|
 * |    0      2331      G   /usr/lib/xorg/Xorg                             8MiB |
 * +-----------------------------------------------------------------------------+
 */

//Make the ubuntu use X Server for display
$ export DISPLAY=:0

Configuring your own instance

You could also choose to configure your own instance. To begin with, you will need an EC2 instance which contains the latest Nvidia drivers, CUDA9, and cuDNN. In this tutorial we used the Deep Learning AMI (Ubuntu) listed under AWS Marketplace with a p2.xlarge instance.

Installing the ML-Agents toolkit on the instance

After launching your EC2 instance using the ami and ssh into it:

Activate the python3 environment
```
source activate python3
```

Clone the ML-Agents repo and install the required python packages

git clone https://github.com/Unity-Technologies/ml-agents.git
cd ml-agents/python
pip3 install .

Setting up X Server (optional)

X Server setup is only necessary if you want to do training that requires visual observation input. Instructions here are adapted from this Medium post on running general Unity applications in the cloud.

Current limitations of the Unity Engine require that a screen be available to render to when using visual observations. In order to make this possible when training on a remote server, a virtual screen is required. We can do this by installing Xorg and creating a virtual screen. Once installed and created, we can display the Unity environment in the virtual environment, and train as we would on a local machine. Ensure that headless mode is disabled when building linux executables which use visual observations.

Install and setup Xorg:

//Install Xorg
$ sudo apt-get update
$ sudo apt-get install -y xserver-xorg mesa-utils
$ sudo nvidia-xconfig -a --use-display-device=None --virtual=1280x1024

//Get the BusID information
$ nvidia-xconfig --query-gpu-info

//Add the BusID information to your /etc/X11/xorg.conf file
$ sudo sed -i 's/    BoardName      "Tesla K80"/    BoardName      "Tesla K80"\n    BusID          "0:30:0"/g' /etc/X11/xorg.conf

//Remove the Section "Files" from the /etc/X11/xorg.conf file
$ sudo vim /etc/X11/xorg.conf //And remove two lines that contain Section "Files" and EndSection

Update and setup Nvidia driver:

//Download and install the latest Nvidia driver for ubuntu
$ wget http://download.nvidia.com/XFree86/Linux-x86_64/390.67/NVIDIA-Linux-x86_64-390.67.run
$ sudo /bin/bash ./NVIDIA-Linux-x86_64-390.67.run --accept-license --no-questions --ui=none

//Disable Nouveau as it will clash with the Nvidia driver
$ sudo echo 'blacklist nouveau'  | sudo tee -a /etc/modprobe.d/blacklist.conf
$ sudo echo 'options nouveau modeset=0'  | sudo tee -a /etc/modprobe.d/blacklist.conf
$ sudo echo options nouveau modeset=0 | sudo tee -a /etc/modprobe.d/nouveau-kms.conf
$ sudo update-initramfs -u

Restart the EC2 instance:
```
sudo reboot now
```

Make sure there are no Xorg processes running:

//Kill any possible running Xorg processes
//Note that you might have to run this command multiple times depending on how Xorg is configured.
$ sudo killall Xorg

//Check if there is any Xorg process left
//You will have a list of processes running on the GPU, Xorg should not be in the list, as shown below.
$ nvidia-smi
/*
 * Thu Jun 14 20:21:11 2018
 * +-----------------------------------------------------------------------------+
 * | NVIDIA-SMI 390.67                 Driver Version: 390.67                    |
 * |-------------------------------+----------------------+----------------------+
 * | GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
 * | Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
 * |===============================+======================+======================|
 * |   0  Tesla K80           On   | 00000000:00:1E.0 Off |                    0 |
 * | N/A   37C    P8    31W / 149W |      0MiB / 11441MiB |      0%      Default |
 * +-------------------------------+----------------------+----------------------+
 *
 * +-----------------------------------------------------------------------------+
 * | Processes:                                                       GPU Memory |
 * |  GPU       PID   Type   Process name                             Usage      |
 * |=============================================================================|
 * |  No running processes found                                                 |
 * +-----------------------------------------------------------------------------+
 */

Start X Server and make the ubuntu use X Server for display:

//Start the X Server, press Enter to come to the command line
$ sudo /usr/bin/X :0 &

//Check if Xorg process is running
//You will have a list of processes running on the GPU, Xorg should be in the list.
$ nvidia-smi

//Make the ubuntu use X Server for display
$ export DISPLAY=:0

Ensure the Xorg is correctly configured:

//For more information on glxgears, see ftp://www.x.org/pub/X11R6.8.1/doc/glxgears.1.html.
$ glxgears
//If Xorg is configured correctly, you should see the following message
/*
 * Running synchronized to the vertical refresh.  The framerate should be
 * approximately the same as the monitor refresh rate.
 * 137296 frames in 5.0 seconds = 27459.053 FPS
 * 141674 frames in 5.0 seconds = 28334.779 FPS
 * 141490 frames in 5.0 seconds = 28297.875 FPS
 */

Training on EC2 instance

In the Unity Editor, load a project containing an ML-Agents environment (you can use one of the example environments if you have not created your own).
Open the Build Settings window (menu: File > Build Settings).
Select Linux as the Target Platform, and x86_64 as the target architecture.
Check Headless Mode (If you haven't setup the X Server).
Click Build to build the Unity environment executable.
Upload the executable to your EC2 instance within ml-agents folder.
Test the instance setup from Python using:
```
from mlagents.envs import UnityEnvironment

env = UnityEnvironment(<your_env>)
```
Where <your_env> corresponds to the path to your environment executable.

You should receive a message confirming that the environment was loaded successfully.

Train the executable

//cd into your ml-agents/python folder
chmod +x <your_env>.x86_64
python learn.py <your_env> --train

8.7 KiB 原始文件 文件历史