ml-agents/docs/Learning-Environment-Design-Agents.md

Agents

Table of Contents:

• Decisions
• Observations and Sensors
  • Vector Observations
    • One-hot encoding categorical information
    • Normalization
    • Vector Observation Summary & Best Practices
  • Visual Observations
    • Visual Observation Summary & Best Practices
  • Raycast Observations
    • RayCast Observation Summary & Best Practices
• Actions
  • Continuous Action Space
  • Discrete Action Space
    • Masking Discrete Actions
  • Actions Summary & Best Practices
• Rewards
  • Examples
  • Rewards Summary & Best Practices
• Agent Properties
• Destroying an Agent
• Defining Teams for Multi-agent Scenarios
• Recording Demonstrations

An agent is an entity that can observe its environment, decide on the best course of action using those observations, and execute those actions within its environment. Agents can be created in Unity by extending the Agent class. The most important aspects of creating agents that can successfully learn are the observations the agent collects, and the reward you assign to estimate the value of the agent's current state toward accomplishing its tasks.

An Agent passes its observations to its Policy. The Policy then makes a decision and passes the chosen action back to the agent. Your agent code must execute the action, for example, move the agent in one direction or another. In order to train an agent using reinforcement learning, your agent must calculate a reward value at each action. The reward is used to discover the optimal decision-making policy.

The Policy class abstracts out the decision making logic from the Agent itself so that you can use the same Policy in multiple Agents. How a Policy makes its decisions depends on the Behavior Parameters associated with the agent. If you set Behavior Type to Heuristic Only, the Agent will use its Heuristic() method to make decisions which can allow you to control the Agent manually or write your own Policy. If the Agent has a Model file, its Policy will use the neural network Model to take decisions.

When you create an Agent, you must extend the base Agent class. This includes implementing the following methods:

• Agent.OnEpisodeBegin() — Called at the beginning of an Agent's episode, including at the beginning of the simulation. The Ball3DAgent class uses this function to reset the agent cube and ball to their starting positions. The function randomizes the reset values so that the training generalizes to more than a specific starting position and agent cube attitude.
• Agent.CollectObservations(VectorSensor sensor) — Called every simulation step. Responsible for collecting the Agent's observations of the environment. Since the Behavior Parameters of the Agent are set with vector observation space with a state size of 8, the CollectObservations(VectorSensor sensor) must call VectorSensor.AddObservation() such that vector size adds up to 8.
• Agent.OnActionReceived() — Called every time the Agent receives an action to take. Receives the action chosen by the Agent. The vector action spaces result in a small change in the agent cube's rotation at each step. The OnActionReceived() method assigns a reward to the Agent; in this example, an Agent receives a small positive reward for each step it keeps the ball on the agent cube's head and a larger, negative reward for dropping the ball. An Agent's episode is also ended when it drops the ball so that it will reset with a new ball for the next simulation step.
• Agent.Heuristic() - When the Behavior Type is set to Heuristic Only in the Behavior Parameters of the Agent, the Agent will use the Heuristic() method to generate the actions of the Agent. As such, the Heuristic() method returns an array of floats. In the case of the Ball 3D Agent, the Heuristic() method converts the keyboard inputs into actions.

Decisions

The observation-decision-action-reward cycle repeats each time the Agent request a decision. Agents will request a decision when Agent.RequestDecision() is called. If you need the Agent to request decisions on its own at regular intervals, add a Decision Requester component to the Agent's GameObject. Making decisions at regular step intervals is generally most appropriate for physics-based simulations. For example, an agent in a robotic simulator that must provide fine-control of joint torques should make its decisions every step of the simulation. On the other hand, an agent that only needs to make decisions when certain game or simulation events occur, such as in a turn-based game, should call Agent.RequestDecision() manually.

Observations and Sensors

To make informed decisions, an agent must first make observations of the state of the environment. The observations are collected by Sensors attached to the agent GameObject. By default, agents come with a VectorSensor which allows them to collect floating-point observations into a single array. There are additional sensor components which can be attached to the agent GameObject which collect their own observations, or modify other observations. These are:

• CameraSensorComponent - Allows image from Camera to be used as observation.
• RenderTextureSensorComponent - Allows content of RenderTexture to be used as observation.
• RayPerceptionSensorComponent - Allows information from set of ray-casts to be used as observation.

Vector Observations

Vector observations are best used for aspects of the environment which are numerical and non-visual. The Policy class calls the CollectObservations(VectorSensor sensor) method of each Agent. Your implementation of this function must call VectorSensor.AddObservation to add vector observations.

In order for an agent to learn, the observations should include all the information an agent needs to accomplish its task. Without sufficient and relevant information, an agent may learn poorly or may not learn at all. A reasonable approach for determining what information should be included is to consider what you would need to calculate an analytical solution to the problem, or what you would expect a human to be able to use to solve the problem.

For examples of various state observation functions, you can look at the example environments included in the ML-Agents SDK. For instance, the 3DBall example uses the rotation of the platform, the relative position of the ball, and the velocity of the ball as its state observation. As an experiment, you can remove the velocity components from the observation and retrain the 3DBall agent. While it will learn to balance the ball reasonably well, the performance of the agent without using velocity is noticeably worse.

public GameObject ball;

private List<float> state = new List<float>();
public override void CollectObservations(VectorSensor sensor)
{
    sensor.AddObservation(gameObject.transform.rotation.z);
    sensor.AddObservation(gameObject.transform.rotation.x);
    sensor.AddObservation((ball.transform.position.x - gameObject.transform.position.x));
    sensor.AddObservation((ball.transform.position.y - gameObject.transform.position.y));
    sensor.AddObservation((ball.transform.position.z - gameObject.transform.position.z));
    sensor.AddObservation(ball.transform.GetComponent<Rigidbody>().velocity.x);
    sensor.AddObservation(ball.transform.GetComponent<Rigidbody>().velocity.y);
    sensor.AddObservation(ball.transform.GetComponent<Rigidbody>().velocity.z);
}

The feature vector must always contain the same number of elements and observations must always be in the same position within the list. If the number of observed entities in an environment can vary you can pad the feature vector with zeros for any missing entities in a specific observation or you can limit an agent's observations to a fixed subset. For example, instead of observing every enemy agent in an environment, you could only observe the closest five.

When you set up an Agent's Behavior Parameters in the Unity Editor, set the following properties to use a vector observation:

• Space Size — The state size must match the length of your feature vector.

The observation feature vector is a list of floating point numbers, which means you must convert any other data types to a float or a list of floats.

The VectorSensor.AddObservation method provides a number of overloads for adding common types of data to your observation vector. You can add Integers and booleans directly to the observation vector, as well as some common Unity data types such as Vector2, Vector3, and Quaternion.

One-hot encoding categorical information

Type enumerations should be encoded in the one-hot style. That is, add an element to the feature vector for each element of enumeration, setting the element representing the observed member to one and set the rest to zero. For example, if your enumeration contains [Sword, Shield, Bow] and the agent observes that the current item is a Bow, you would add the elements: 0, 0, 1 to the feature vector. The following code example illustrates how to add.

enum CarriedItems { Sword, Shield, Bow, LastItem }
private List<float> state = new List<float>();
public override void CollectObservations(VectorSensor sensor)
{
    for (int ci = 0; ci < (int)CarriedItems.LastItem; ci++)
    {
        sensor.AddObservation((int)currentItem == ci ? 1.0f : 0.0f);
    }
}

VectorSensor also provides a two-argument function AddOneHotObservation() as a shortcut for one-hot style observations. The following example is identical to the previous one.

enum CarriedItems { Sword, Shield, Bow, LastItem }
const int NUM_ITEM_TYPES = (int)CarriedItems.LastItem;

public override void CollectObservations(VectorSensor sensor)
{
    // The first argument is the selection index; the second is the
    // number of possibilities
    sensor.AddOneHotObservation((int)currentItem, NUM_ITEM_TYPES);
}

Normalization

For the best results when training, you should normalize the components of your feature vector to the range [-1, +1] or [0, 1]. When you normalize the values, the PPO neural network can often converge to a solution faster. Note that it isn't always necessary to normalize to these recommended ranges, but it is considered a best practice when using neural networks. The greater the variation in ranges between the components of your observation, the more likely that training will be affected.

To normalize a value to [0, 1], you can use the following formula:

normalizedValue = (currentValue - minValue)/(maxValue - minValue)

⚠️ For vectors, you should apply the above formula to each component (x, y, and z). Note that this is not the same as using the Vector3.normalized property or Vector3.Normalize() method in Unity (and similar for Vector2).

Rotations and angles should also be normalized. For angles between 0 and 360 degrees, you can use the following formulas:

Quaternion rotation = transform.rotation;
Vector3 normalized = rotation.eulerAngles / 180.0f - Vector3.one;  // [-1,1]
Vector3 normalized = rotation.eulerAngles / 360.0f;  // [0,1]

For angles that can be outside the range [0,360], you can either reduce the angle, or, if the number of turns is significant, increase the maximum value used in your normalization formula.

Vector Observation Summary & Best Practices

• Vector Observations should include all variables relevant for allowing the agent to take the optimally informed decision, and ideally no extraneous information.
• In cases where Vector Observations need to be remembered or compared over time, either an RNN should be used in the model, or the Stacked Vectors value in the agent GameObject's Behavior Parameters should be changed.
• Categorical variables such as type of object (Sword, Shield, Bow) should be encoded in one-hot fashion (i.e. 3 -> 0, 0, 1). This can be done automatically using the AddOneHotObservation() method of the VectorSensor.
• In general, all inputs should be normalized to be in the range 0 to +1 (or -1 to 1). For example, the x position information of an agent where the maximum possible value is maxValue should be recorded as VectorSensor.AddObservation(transform.position.x / maxValue); rather than VectorSensor.AddObservation(transform.position.x);.
• Positional information of relevant GameObjects should be encoded in relative coordinates wherever possible. This is often relative to the agent position.

Visual Observations

Visual observations are generally provided to agent via either a CameraSensor or RenderTextureSensor. These collect image information and transforms it into a 3D Tensor which can be fed into the convolutional neural network (CNN) of the agent policy. For more information on CNNs, see this guide. This allows agents to learn from spatial regularities in the observation images. It is possible to use visual and vector observations with the same agent.

Agents using visual observations can capture state of arbitrary complexity and are useful when the state is difficult to describe numerically. However, they are also typically less efficient and slower to train, and sometimes don't succeed at all as compared to vector observations. As such, they should only be used when it is not possible to properly define the problem using vector or ray-cast observations.

Visual observations can be derived from Cameras or RenderTextures within your scene. To add a visual observation to an Agent, add either a Camera Sensor Component or RenderTextures Sensor Component to the Agent. Then drag the camera or render texture you want to add to the Camera or RenderTexture field. You can have more than one camera or render texture and even use a combination of both attached to an Agent. For each visual observation, set the width and height of the image (in pixels) and whether or not the observation is color or grayscale.

or

Each Agent that uses the same Policy must have the same number of visual observations, and they must all have the same resolutions (including whether or not they are grayscale). Additionally, each Sensor Component on an Agent must have a unique name so that they can be sorted deterministically (the name must be unique for that Agent, but multiple Agents can have a Sensor Component with the same name).

When using RenderTexture visual observations, a handy feature for debugging is adding a Canvas, then adding a Raw Image with it's texture set to the Agent's RenderTexture. This will render the agent observation on the game screen.

The GridWorld environment is an example on how to use a RenderTexture for both debugging and observation. Note that in this example, a Camera is rendered to a RenderTexture, which is then used for observations and debugging. To update the RenderTexture, the Camera must be asked to render every time a decision is requested within the game code. When using Cameras as observations directly, this is done automatically by the Agent.

Visual Observation Summary & Best Practices

• To collect visual observations, attach CameraSensor or RenderTextureSensor components to the agent GameObject.
• Visual observations should generally be used unless vector observations are not sufficient.
• Image size should be kept as small as possible, without the loss of needed details for decision making.
• Images should be made grayscale in situations where color information is not needed for making informed decisions.

Raycast Observations

Raycasts are another possible method for providing observations to an agent. This can be easily implemented by adding a RayPerceptionSensorComponent3D (or RayPerceptionSensorComponent2D) to the Agent GameObject.

During observations, several rays (or spheres, depending on settings) are cast into the physics world, and the objects that are hit determine the observation vector that is produced.

Both sensor components have several settings:

• Detectable Tags A list of strings corresponding to the types of objects that the Agent should be able to distinguish between. For example, in the WallJump example, we use "wall", "goal", and "block" as the list of objects to detect.
• Rays Per Direction Determines the number of rays that are cast. One ray is always cast forward, and this many rays are cast to the left and right.
• Max Ray Degrees The angle (in degrees) for the outermost rays. 90 degrees corresponds to the left and right of the agent.
• Sphere Cast Radius The size of the sphere used for sphere casting. If set to 0, rays will be used instead of spheres. Rays may be more efficient, especially in complex scenes.
• Ray Length The length of the casts
• Ray Layer Mask The LayerMask passed to the raycast or spherecast. This can be used to ignore certain types of objects when casting.
• Observation Stacks The number of previous results to "stack" with the cast results. Note that this can be independent of the "Stacked Vectors" setting in Behavior Parameters.
• Start Vertical Offset (3D only) The vertical offset of the ray start point.
• End Vertical Offset (3D only) The vertical offset of the ray end point.

In the example image above, the Agent has two RayPerceptionSensorComponent3Ds. Both use 3 Rays Per Direction and 90 Max Ray Degrees. One of the components had a vertical offset, so the Agent can tell whether it's clear to jump over the wall.

The total size of the created observations is

(Observation Stacks) * (1 + 2 * Rays Per Direction) * (Num Detectable Tags + 2)

so the number of rays and tags should be kept as small as possible to reduce the amount of data used. Note that this is separate from the State Size defined in Behavior Parameters, so you don't need to worry about the formula above when setting the State Size.

RayCast Observation Summary & Best Practices

• Attach RayPerceptionSensorComponent3D or RayPerceptionSensorComponent2D to use.
• This observation type is best used when there is relevant spatial information for the agent that doesn't require a fully rendered image to convey.
• Use as few rays and tags as necessary to solve the problem in order to improve learning stability and agent performance.

Actions

An action is an instruction from the Policy that the agent carries out. The action is passed to the Agent as a parameter when the Academy invokes the agent's OnActionReceived() function. Actions for an agent can take one of two forms, either Continuous or Discrete.

When you specify that the vector action space is Continuous, the action parameter passed to the Agent is an array of floating point numbers with length equal to the Vector Action Space Size property. When you specify a Discrete vector action space type, the action parameter is an array containing integers. Each integer is an index into a list or table of commands. In the Discrete vector action space type, the action parameter is an array of indices. The number of indices in the array is determined by the number of branches defined in the Branches Size property. Each branch corresponds to an action table, you can specify the size of each table by modifying the Branches property.

Neither the Policy nor the training algorithm know anything about what the action values themselves mean. The training algorithm simply tries different values for the action list and observes the affect on the accumulated rewards over time and many training episodes. Thus, the only place actions are defined for an Agent is in the OnActionReceived() function.

For example, if you designed an agent to move in two dimensions, you could use either continuous or the discrete vector actions. In the continuous case, you would set the vector action size to two (one for each dimension), and the agent's Policy would create an action with two floating point values. In the discrete case, you would use one Branch with a size of four (one for each direction), and the Policy would create an action array containing a single element with a value ranging from zero to three. Alternatively, you could create two branches of size two (one for horizontal movement and one for vertical movement), and the Policy would create an action array containing two elements with values ranging from zero to one.

Note that when you are programming actions for an agent, it is often helpful to test your action logic using the Heuristic() method of the Agent, which lets you map keyboard commands to actions.

The 3DBall and Area example environments are set up to use either the continuous or the discrete vector action spaces.

Continuous Action Space

When an Agent uses a Policy set to the Continuous vector action space, the action parameter passed to the Agent's OnActionReceived() function is an array with length equal to the Vector Action Space Size property value. The individual values in the array have whatever meanings that you ascribe to them. If you assign an element in the array as the speed of an Agent, for example, the training process learns to control the speed of the Agent through this parameter.

The Reacher example defines a continuous action space with four control values.

These control values are applied as torques to the bodies making up the arm:

public override void OnActionReceived(float[] act)
{
    float torque_x = Mathf.Clamp(act[0], -1, 1) * 100f;
    float torque_z = Mathf.Clamp(act[1], -1, 1) * 100f;
    rbA.AddTorque(new Vector3(torque_x, 0f, torque_z));

    torque_x = Mathf.Clamp(act[2], -1, 1) * 100f;
    torque_z = Mathf.Clamp(act[3], -1, 1) * 100f;
    rbB.AddTorque(new Vector3(torque_x, 0f, torque_z));
}

By default the output from our provided PPO algorithm pre-clamps the values of vectorAction into the [-1, 1] range. It is a best practice to manually clip these as well, if you plan to use a 3rd party algorithm with your environment. As shown above, you can scale the control values as needed after clamping them.

Discrete Action Space

When an Agent uses a Discrete vector action space, the action parameter passed to the Agent's OnActionReceived() function is an array containing indices. With the discrete vector action space, Branches is an array of integers, each value corresponds to the number of possibilities for each branch.

For example, if we wanted an Agent that can move in a plane and jump, we could define two branches (one for motion and one for jumping) because we want our agent be able to move and jump concurrently. We define the first branch to have 5 possible actions (don't move, go left, go right, go backward, go forward) and the second one to have 2 possible actions (don't jump, jump). The OnActionReceived() method would look something like:

// Get the action index for movement
int movement = Mathf.FloorToInt(act[0]);
// Get the action index for jumping
int jump = Mathf.FloorToInt(act[1]);

// Look up the index in the movement action list:
if (movement == 1) { directionX = -1; }
if (movement == 2) { directionX = 1; }
if (movement == 3) { directionZ = -1; }
if (movement == 4) { directionZ = 1; }
// Look up the index in the jump action list:
if (jump == 1 && IsGrounded()) { directionY = 1; }

// Apply the action results to move the Agent
gameObject.GetComponent<Rigidbody>().AddForce(
    new Vector3(
        directionX * 40f, directionY * 300f, directionZ * 40f));

Note that the above code example is a simplified extract from the AreaAgent class, which provides alternate implementations for both the discrete and the continuous action spaces.

Masking Discrete Actions

When using Discrete Actions, it is possible to specify that some actions are impossible for the next decision. When the Agent is controlled by a neural network, the Agent will be unable to perform the specified action. Note that when the Agent is controlled by its Heuristic, the Agent will still be able to decide to perform the masked action. In order to mask an action, override the Agent.CollectDiscreteActionMasks() virtual method, and call DiscreteActionMasker.SetMask() in it:

public override void CollectDiscreteActionMasks(DiscreteActionMasker actionMasker){
    actionMasker.SetMask(branch, actionIndices)
}

Where:

• branch is the index (starting at 0) of the branch on which you want to mask the action
• actionIndices is a list of int corresponding to the indices of the actions that the Agent cannot perform.

For example, if you have an Agent with 2 branches and on the first branch (branch 0) there are 4 possible actions : "do nothing", "jump", "shoot" and "change weapon". Then with the code bellow, the Agent will either "do nothing" or "change weapon" for his next decision (since action index 1 and 2 are masked)

SetMask(0, new int[2]{1,2})

Notes:

• You can call SetMask multiple times if you want to put masks on multiple branches.
• You cannot mask all the actions of a branch.
• You cannot mask actions in continuous control.

Actions Summary & Best Practices

• Actions can either use Discrete or Continuous spaces.
• When using Discrete it is possible to assign multiple action branches, and to mask certain actions.
• In general, smaller action spaces will make for easier learning.
• Be sure to set the Vector Action's Space Size to the number of used Vector Actions, and not greater, as doing the latter can interfere with the efficiency of the training process.
• When using continuous control, action values should be clipped to an appropriate range. The provided PPO model automatically clips these values between -1 and 1, but third party training systems may not do so.

Rewards

In reinforcement learning, the reward is a signal that the agent has done something right. The PPO reinforcement learning algorithm works by optimizing the choices an agent makes such that the agent earns the highest cumulative reward over time. The better your reward mechanism, the better your agent will learn.

Note: Rewards are not used during inference by an Agent using a trained model and is also not used during imitation learning.

Perhaps the best advice is to start simple and only add complexity as needed. In general, you should reward results rather than actions you think will lead to the desired results. You can even use the Agent's Heuristic to control the Agent while watching how it accumulates rewards.

Allocate rewards to an Agent by calling the AddReward() or SetReward() methods on the agent. The reward assigned between each decision should be in the range [-1,1]. Values outside this range can lead to unstable training. The reward value is reset to zero when the agent receives a new decision. If there are multiple calls to AddReward() for a single agent decision, the rewards will be summed together to evaluate how good the previous decision was. The SetReward() will override all previous rewards given to an agent since the previous decision.

Examples

You can examine the OnActionReceived() functions defined in the example environments to see how those projects allocate rewards.

The GridAgent class in the GridWorld example uses a very simple reward system:

Collider[] hitObjects = Physics.OverlapBox(trueAgent.transform.position,
                                           new Vector3(0.3f, 0.3f, 0.3f));
if (hitObjects.Where(col => col.gameObject.tag == "goal").ToArray().Length == 1)
{
    AddReward(1.0f);
    EndEpisode();
}
if (hitObjects.Where(col => col.gameObject.tag == "pit").ToArray().Length == 1)
{
    AddReward(-1f);
    EndEpisode();
}

The agent receives a positive reward when it reaches the goal and a negative reward when it falls into the pit. Otherwise, it gets no rewards. This is an example of a sparse reward system. The agent must explore a lot to find the infrequent reward.

In contrast, the AreaAgent in the Area example gets a small negative reward every step. In order to get the maximum reward, the agent must finish its task of reaching the goal square as quickly as possible:

AddReward( -0.005f);
MoveAgent(act);

if (gameObject.transform.position.y < 0.0f ||
    Mathf.Abs(gameObject.transform.position.x - area.transform.position.x) > 8f ||
    Mathf.Abs(gameObject.transform.position.z + 5 - area.transform.position.z) > 8)
{
    EndEpisode();
    AddReward(-1f);
}

The agent also gets a larger negative penalty if it falls off the playing surface.

The Ball3DAgent in the 3DBall takes a similar approach, but allocates a small positive reward as long as the agent balances the ball. The agent can maximize its rewards by keeping the ball on the platform:

SetReward(0.1f);

// When ball falls mark Agent as finished and give a negative penalty
if ((ball.transform.position.y - gameObject.transform.position.y) < -2f ||
    Mathf.Abs(ball.transform.position.x - gameObject.transform.position.x) > 3f ||
    Mathf.Abs(ball.transform.position.z - gameObject.transform.position.z) > 3f)
{
    SetReward(-1f);
    EndEpisode();

}

The Ball3DAgent also assigns a negative penalty when the ball falls off the platform.

Note that all of these environments make use of the EndEpisode() method, which manually terminates an episode when a termination condition is reached. This can be called independently of the Max Step property.

Rewards Summary & Best Practices

• Use AddReward() to accumulate rewards between decisions. Use SetReward() to overwrite any previous rewards accumulate between decisions.
• The magnitude of any given reward should typically not be greater than 1.0 in order to ensure a more stable learning process.
• Positive rewards are often more helpful to shaping the desired behavior of an agent than negative rewards. Excessive negative rewards can result in the agent failing to learn any meaningful behavior.
• For locomotion tasks, a small positive reward (+0.1) for forward velocity is typically used.
• If you want the agent to finish a task quickly, it is often helpful to provide a small penalty every step (-0.05) that the agent does not complete the task. In this case completion of the task should also coincide with the end of the episode by calling EndEpisode() on the agent when it has accomplished its goal.

Agent Properties

• Behavior Parameters - The parameters dictating what Policy the Agent will receive.
  • Behavior Name - The identifier for the behavior. Agents with the same behavior name will learn the same policy.
  • Vector Observation
    • Space Size - Length of vector observation for the Agent.
    • Stacked Vectors - The number of previous vector observations that will be stacked and used collectively for decision making. This results in the effective size of the vector observation being passed to the Policy being: Space Size x Stacked Vectors.
  • Vector Action
    • Space Type - Corresponds to whether action vector contains a single integer (Discrete) or a series of real-valued floats (Continuous).
    • Space Size (Continuous) - Length of action vector.
    • Branches (Discrete) - An array of integers, defines multiple concurrent discrete actions. The values in the Branches array correspond to the number of possible discrete values for each action branch.
  • Model - The neural network model used for inference (obtained after training)
  • Inference Device - Whether to use CPU or GPU to run the model during inference
  • Behavior Type - Determines whether the Agent will do training, inference, or use its Heuristic() method:
    • Default - the Agent will train if they connect to a python trainer, otherwise they will perform inference.
    • Heuristic Only - the Agent will always use the Heuristic() method.
    • Inference Only - the Agent will always perform inference.
  • Team ID - Used to define the team for self-play
  • Use Child Sensors - Whether to use all Sensor components attached to child GameObjects of this Agent.
• Max Step - The per-agent maximum number of steps. Once this number is reached, the Agent will be reset.

Destroying an Agent

You can destroy an Agent GameObject during the simulation. Make sure that there is always at least one Agent training at all times by either spawning a new Agent every time one is destroyed or by re-spawning new Agents when the whole environment resets.

Defining Teams for Multi-agent Scenarios

Self-play is triggered by including the self-play hyperparameter hierarchy in the trainer configuration. To distinguish opposing agents, set the team ID to different integer values in the behavior parameters script on the agent prefab.

Team ID must be 0 or an integer greater than 0.

In symmetric games, since all agents (even on opposing teams) will share the same policy, they should have the same 'Behavior Name' in their Behavior Parameters Script. In asymmetric games, they should have a different Behavior Name in their Behavior Parameters script. Note, in asymmetric games, the agents must have both different Behavior Names and different team IDs!

For examples of how to use this feature, you can see the trainer configurations and agent prefabs for our Tennis and Soccer environments. Tennis and Soccer provide examples of symmetric games. To train an asymmetric game, specify trainer configurations for each of your behavior names and include the self-play hyperparameter hierarchy in both.

Recording Demonstrations

In order to record demonstrations from an agent, add the Demonstration Recorder component to a GameObject in the scene which contains an Agent component. Once added, it is possible to name the demonstration that will be recorded from the agent.

When Record is checked, a demonstration will be created whenever the scene is played from the Editor. Depending on the complexity of the task, anywhere from a few minutes or a few hours of demonstration data may be necessary to be useful for imitation learning. When you have recorded enough data, end the Editor play session. A .demo file will be created in the Assets/Demonstrations folder (by default). This file contains the demonstrations. Clicking on the file will provide metadata about the demonstration in the inspector.

You can then specify the path to this file in your training configurations.