using System;
using System.Collections.Generic;
using System.Collections.ObjectModel;
using UnityEngine;
using Unity.Barracuda;
using Unity.MLAgents.Sensors;
using Unity.MLAgents.Sensors.Reflection;
using Unity.MLAgents.Demonstrations;
using Unity.MLAgents.Policies;
using UnityEngine.Serialization;
namespace Unity.MLAgents
{
///
/// Struct that contains all the information for an Agent, including its
/// observations, actions and current status.
///
internal struct AgentInfo
{
///
/// Keeps track of the last vector action taken by the Brain.
///
public float[] storedVectorActions;
///
/// For discrete control, specifies the actions that the agent cannot take.
/// An element of the mask array is true if the action is prohibited.
///
public bool[] discreteActionMasks;
///
/// The current agent reward.
///
public float reward;
///
/// Whether the agent is done or not.
///
public bool done;
///
/// Whether the agent has reached its max step count for this episode.
///
public bool maxStepReached;
///
/// Episode identifier each agent receives at every reset. It is used
/// to separate between different agents in the environment.
///
public int episodeId;
}
///
/// Struct that contains the action information sent from the Brain to the
/// Agent.
///
internal struct AgentAction
{
public float[] vectorActions;
}
///
/// An agent is an actor that can observe its environment, decide on the
/// best course of action using those observations, and execute those actions
/// within the environment.
///
///
/// Use the Agent class as the subclass for implementing your own agents. Add
/// your Agent implementation to a [GameObject] in the [Unity scene] that serves
/// as the agent's environment.
///
/// Agents in an environment operate in *steps*. At each step, an agent collects observations,
/// passes them to its decision-making policy, and receives an action vector in response.
///
/// Agents make observations using implementations. The ML-Agents
/// API provides implementations for visual observations ()
/// raycast observations (), and arbitrary
/// data observations (). You can add the
/// and or
/// components to an agent's [GameObject] to use
/// those sensor types. You can implement the
/// function in your Agent subclass to use a vector observation. The Agent class calls this
/// function before it uses the observation vector to make a decision. (If you only use
/// visual or raycast observations, you do not need to implement
/// .)
///
/// Assign a decision making policy to an agent using a
/// component attached to the agent's [GameObject]. The setting
/// determines how decisions are made:
///
/// * : decisions are made by the external process,
/// when connected. Otherwise, decisions are made using inference. If no inference model
/// is specified in the BehaviorParameters component, then heuristic decision
/// making is used.
/// * : decisions are always made using the trained
/// model specified in the component.
/// * : when a decision is needed, the agent's
/// function is called. Your implementation is responsible for
/// providing the appropriate action.
///
/// To trigger an agent decision automatically, you can attach a
/// component to the Agent game object. You can also call the agent's
/// function manually. You only need to call when the agent is
/// in a position to act upon the decision. In many cases, this will be every [FixedUpdate]
/// callback, but could be less frequent. For example, an agent that hops around its environment
/// can only take an action when it touches the ground, so several frames might elapse between
/// one decision and the need for the next.
///
/// Use the function to implement the actions your agent can take,
/// such as moving to reach a goal or interacting with its environment.
///
/// When you call on an agent or the agent reaches its count,
/// its current episode ends. You can reset the agent -- or remove it from the
/// environment -- by implementing the function. An agent also
/// becomes done when the resets the environment, which only happens when
/// the receives a reset signal from an external process via the
/// .
///
/// The Agent class extends the Unity [MonoBehaviour] class. You can implement the
/// standard [MonoBehaviour] functions as needed for your agent. Since an agent's
/// observations and actions typically take place during the [FixedUpdate] phase, you should
/// only use the [MonoBehaviour.Update] function for cosmetic purposes. If you override the [MonoBehaviour]
/// methods, [OnEnable()] or [OnDisable()], always call the base Agent class implementations.
///
/// You can implement the function to specify agent actions using
/// your own heuristic algorithm. Implementing a heuristic function can be useful
/// for debugging. For example, you can use keyboard input to select agent actions in
/// order to manually control an agent's behavior.
///
/// Note that you can change the inference model assigned to an agent at any step
/// by calling .
///
/// See [Agents] and [Reinforcement Learning in Unity] in the [Unity ML-Agents Toolkit manual] for
/// more information on creating and training agents.
///
/// For sample implementations of agent behavior, see the examples available in the
/// [Unity ML-Agents Toolkit] on Github.
///
/// [MonoBehaviour]: https://docs.unity3d.com/ScriptReference/MonoBehaviour.html
/// [GameObject]: https://docs.unity3d.com/Manual/GameObjects.html
/// [Unity scene]: https://docs.unity3d.com/Manual/CreatingScenes.html
/// [FixedUpdate]: https://docs.unity3d.com/ScriptReference/MonoBehaviour.FixedUpdate.html
/// [MonoBehaviour.Update]: https://docs.unity3d.com/ScriptReference/MonoBehaviour.Update.html
/// [OnEnable()]: https://docs.unity3d.com/ScriptReference/MonoBehaviour.OnEnable.html
/// [OnDisable()]: https://docs.unity3d.com/ScriptReference/MonoBehaviour.OnDisable.html]
/// [OnBeforeSerialize()]: https://docs.unity3d.com/ScriptReference/MonoBehaviour.OnBeforeSerialize.html
/// [OnAfterSerialize()]: https://docs.unity3d.com/ScriptReference/MonoBehaviour.OnAfterSerialize.html
/// [Agents]: https://github.com/Unity-Technologies/ml-agents/blob/release_2_docs/docs/Learning-Environment-Design-Agents.md
/// [Reinforcement Learning in Unity]: https://github.com/Unity-Technologies/ml-agents/blob/release_2_docs/docs/Learning-Environment-Design.md
/// [Unity ML-Agents Toolkit]: https://github.com/Unity-Technologies/ml-agents
/// [Unity ML-Agents Toolkit manual]: https://github.com/Unity-Technologies/ml-agents/blob/release_2_docs/docs/Readme.md
///
///
[HelpURL("https://github.com/Unity-Technologies/ml-agents/blob/release_2_docs/" +
"docs/Learning-Environment-Design-Agents.md")]
[Serializable]
[RequireComponent(typeof(BehaviorParameters))]
public class Agent : MonoBehaviour, ISerializationCallbackReceiver
{
IPolicy m_Brain;
BehaviorParameters m_PolicyFactory;
/// This code is here to make the upgrade path for users using MaxStep
/// easier. We will hook into the Serialization code and make sure that
/// agentParameters.maxStep and this.maxStep are in sync.
[Serializable]
internal struct AgentParameters
{
public int maxStep;
}
[SerializeField][HideInInspector]
internal AgentParameters agentParameters;
[SerializeField][HideInInspector]
internal bool hasUpgradedFromAgentParameters;
///
/// The maximum number of steps the agent takes before being done.
///
/// The maximum steps for an agent to take before it resets; or 0 for
/// unlimited steps.
///
/// The max step value determines the maximum length of an agent's episodes.
/// Set to a positive integer to limit the episode length to that many steps.
/// Set to 0 for unlimited episode length.
///
/// When an episode ends and a new one begins, the Agent object's
/// function is called. You can implement
/// to reset the agent or remove it from the
/// environment. An agent's episode can also end if you call its
/// method or an external process resets the environment through the .
///
/// Consider limiting the number of steps in an episode to avoid wasting time during
/// training. If you set the max step value to a reasonable estimate of the time it should
/// take to complete a task, then agents that haven’t succeeded in that time frame will
/// reset and start a new training episode rather than continue to fail.
///
///
/// To use a step limit when training while allowing agents to run without resetting
/// outside of training, you can set the max step to 0 in
/// if the is not connected to an external process.
///
/// using Unity.MLAgents;
///
/// public class MyAgent : Agent
/// {
/// public override void Initialize()
/// {
/// if (!Academy.Instance.IsCommunicatorOn)
/// {
/// this.MaxStep = 0;
/// }
/// }
/// }
///
/// **Note:** in general, you should limit the differences between the code you execute
/// during training and the code you run during inference.
///
[FormerlySerializedAs("maxStep")]
[HideInInspector] public int MaxStep;
/// Current Agent information (message sent to Brain).
AgentInfo m_Info;
/// Current Agent action (message sent from Brain).
AgentAction m_Action;
/// Represents the reward the agent accumulated during the current step.
/// It is reset to 0 at the beginning of every step.
/// Should be set to a positive value when the agent performs a "good"
/// action that we wish to reinforce/reward, and set to a negative value
/// when the agent performs a "bad" action that we wish to punish/deter.
/// Additionally, the magnitude of the reward should not exceed 1.0
float m_Reward;
/// Keeps track of the cumulative reward in this episode.
float m_CumulativeReward;
/// Whether or not the agent requests an action.
bool m_RequestAction;
/// Whether or not the agent requests a decision.
bool m_RequestDecision;
/// Keeps track of the number of steps taken by the agent in this episode.
/// Note that this value is different for each agent, and may not overlap
/// with the step counter in the Academy, since agents reset based on
/// their own experience.
int m_StepCount;
/// Number of times the Agent has completed an episode.
int m_CompletedEpisodes;
/// Episode identifier each agent receives. It is used
/// to separate between different agents in the environment.
/// This Id will be changed every time the Agent resets.
int m_EpisodeId;
/// Whether or not the Agent has been initialized already
bool m_Initialized;
/// Keeps track of the actions that are masked at each step.
DiscreteActionMasker m_ActionMasker;
///
/// Set of DemonstrationWriters that the Agent will write its step information to.
/// If you use a DemonstrationRecorder component, this will automatically register its DemonstrationWriter.
/// You can also add your own DemonstrationWriter by calling
/// DemonstrationRecorder.AddDemonstrationWriterToAgent()
///
internal ISet DemonstrationWriters = new HashSet();
///
/// List of sensors used to generate observations.
/// Currently generated from attached SensorComponents, and a legacy VectorSensor
///
internal List sensors;
///
/// VectorSensor which is written to by AddVectorObs
///
internal VectorSensor collectObservationsSensor;
///
/// Called when the attached [GameObject] becomes enabled and active.
/// [GameObject]: https://docs.unity3d.com/Manual/GameObjects.html
///
///
/// This function initializes the Agent instance, if it hasn't been initialized yet.
/// Always call the base Agent class version of this function if you implement `OnEnable()`
/// in your own Agent subclasses.
///
///
///
/// protected override void OnEnable()
/// {
/// base.OnEnable();
/// // additional OnEnable logic...
/// }
///
///
protected virtual void OnEnable()
{
LazyInitialize();
}
///
/// Called by Unity immediately before serializing this object.
///
///
/// The Agent class uses OnBeforeSerialize() for internal housekeeping. Call the
/// base class implementation if you need your own custom serialization logic.
///
/// See [OnBeforeSerialize] for more information.
///
/// [OnBeforeSerialize]: https://docs.unity3d.com/ScriptReference/ISerializationCallbackReceiver.OnAfterDeserialize.html
///
///
///
/// public new void OnBeforeSerialize()
/// {
/// base.OnBeforeSerialize();
/// // additional serialization logic...
/// }
///
///
public void OnBeforeSerialize()
{
// Manages a serialization upgrade issue from v0.13 to v0.14 where MaxStep moved
// from AgentParameters (since removed) to Agent
if (MaxStep == 0 && MaxStep != agentParameters.maxStep && !hasUpgradedFromAgentParameters)
{
MaxStep = agentParameters.maxStep;
}
hasUpgradedFromAgentParameters = true;
}
///
/// Called by Unity immediately after deserializing this object.
///
///
/// The Agent class uses OnAfterDeserialize() for internal housekeeping. Call the
/// base class implementation if you need your own custom deserialization logic.
///
/// See [OnAfterDeserialize] for more information.
///
/// [OnAfterDeserialize]: https://docs.unity3d.com/ScriptReference/ISerializationCallbackReceiver.OnAfterDeserialize.html
///
///
///
/// public new void OnAfterDeserialize()
/// {
/// base.OnAfterDeserialize();
/// // additional deserialization logic...
/// }
///
///
public void OnAfterDeserialize()
{
// Manages a serialization upgrade issue from v0.13 to v0.14 where MaxStep moved
// from AgentParameters (since removed) to Agent
if (MaxStep == 0 && MaxStep != agentParameters.maxStep && !hasUpgradedFromAgentParameters)
{
MaxStep = agentParameters.maxStep;
}
hasUpgradedFromAgentParameters = true;
}
///
/// Initializes the agent. Can be safely called multiple times.
///
///
/// This function calls your implementation, if one exists.
///
public void LazyInitialize()
{
if (m_Initialized)
{
return;
}
m_Initialized = true;
// Grab the "static" properties for the Agent.
m_EpisodeId = EpisodeIdCounter.GetEpisodeId();
m_PolicyFactory = GetComponent();
m_Info = new AgentInfo();
m_Action = new AgentAction();
sensors = new List();
Academy.Instance.AgentIncrementStep += AgentIncrementStep;
Academy.Instance.AgentSendState += SendInfo;
Academy.Instance.DecideAction += DecideAction;
Academy.Instance.AgentAct += AgentStep;
Academy.Instance.AgentForceReset += _AgentReset;
m_Brain = m_PolicyFactory.GeneratePolicy(Heuristic);
ResetData();
Initialize();
using (TimerStack.Instance.Scoped("InitializeSensors"))
{
InitializeSensors();
}
// The first time the Academy resets, all Agents in the scene will be
// forced to reset through the event.
// To avoid the Agent resetting twice, the Agents will not begin their
// episode when initializing until after the Academy had its first reset.
if (Academy.Instance.TotalStepCount != 0)
{
OnEpisodeBegin();
}
}
///
/// The reason that the Agent has been set to "done".
///
enum DoneReason
{
///
/// The method was called.
///
DoneCalled,
///
/// The max steps for the Agent were reached.
///
MaxStepReached,
///
/// The Agent was disabled.
///
Disabled,
}
///
/// Called when the attached [GameObject] becomes disabled and inactive.
/// [GameObject]: https://docs.unity3d.com/Manual/GameObjects.html
///
///
/// Always call the base Agent class version of this function if you implement `OnDisable()`
/// in your own Agent subclasses.
///
///
///
/// protected override void OnDisable()
/// {
/// base.OnDisable();
/// // additional OnDisable logic...
/// }
///
///
///
protected virtual void OnDisable()
{
DemonstrationWriters.Clear();
// If Academy.Dispose has already been called, we don't need to unregister with it.
// We don't want to even try, because this will lazily create a new Academy!
if (Academy.IsInitialized)
{
Academy.Instance.AgentIncrementStep -= AgentIncrementStep;
Academy.Instance.AgentSendState -= SendInfo;
Academy.Instance.DecideAction -= DecideAction;
Academy.Instance.AgentAct -= AgentStep;
Academy.Instance.AgentForceReset -= _AgentReset;
}
NotifyAgentDone(DoneReason.Disabled);
m_Brain?.Dispose();
m_Initialized = false;
}
void NotifyAgentDone(DoneReason doneReason)
{
if (m_Info.done)
{
// The Agent was already marked as Done and should not be notified again
return;
}
m_Info.episodeId = m_EpisodeId;
m_Info.reward = m_Reward;
m_Info.done = true;
m_Info.maxStepReached = doneReason == DoneReason.MaxStepReached;
if (collectObservationsSensor != null)
{
// Make sure the latest observations are being passed to training.
collectObservationsSensor.Reset();
CollectObservations(collectObservationsSensor);
}
// Request the last decision with no callbacks
// We request a decision so Python knows the Agent is done immediately
m_Brain?.RequestDecision(m_Info, sensors);
ResetSensors();
// We also have to write any to any DemonstationStores so that they get the "done" flag.
foreach (var demoWriter in DemonstrationWriters)
{
demoWriter.Record(m_Info, sensors);
}
if (doneReason != DoneReason.Disabled)
{
// We don't want to update the reward stats when the Agent is disabled, because this will make
// the rewards look lower than they actually are during shutdown.
m_CompletedEpisodes++;
UpdateRewardStats();
}
m_Reward = 0f;
m_CumulativeReward = 0f;
m_RequestAction = false;
m_RequestDecision = false;
Array.Clear(m_Info.storedVectorActions, 0, m_Info.storedVectorActions.Length);
}
///
/// Updates the Model assigned to this Agent instance.
///
///
/// If the agent already has an assigned model, that model is replaced with the
/// the provided one. However, if you call this function with arguments that are
/// identical to the current parameters of the agent, then no changes are made.
///
/// **Note:** the parameter is ignored when not training.
/// The and parameters
/// are ignored when not using inference.
///
/// The identifier of the behavior. This
/// will categorize the agent when training.
///
/// The model to use for inference.
/// Define the device on which the model
/// will be run.
public void SetModel(
string behaviorName,
NNModel model,
InferenceDevice inferenceDevice = InferenceDevice.CPU)
{
if (behaviorName == m_PolicyFactory.BehaviorName &&
model == m_PolicyFactory.Model &&
inferenceDevice == m_PolicyFactory.InferenceDevice)
{
// If everything is the same, don't make any changes.
return;
}
NotifyAgentDone(DoneReason.Disabled);
m_PolicyFactory.Model = model;
m_PolicyFactory.InferenceDevice = inferenceDevice;
m_PolicyFactory.BehaviorName = behaviorName;
ReloadPolicy();
}
internal void ReloadPolicy()
{
if (!m_Initialized)
{
// If we haven't initialized yet, no need to make any changes now; they'll
// happen in LazyInitialize later.
return;
}
m_Brain?.Dispose();
m_Brain = m_PolicyFactory.GeneratePolicy(Heuristic);
}
///
/// Returns the current step counter (within the current episode).
///
///
/// Current step count.
///
public int StepCount
{
get { return m_StepCount; }
}
///
/// Returns the number of episodes that the Agent has completed (either
/// was called, or maxSteps was reached).
///
///
/// Current episode count.
///
public int CompletedEpisodes
{
get { return m_CompletedEpisodes; }
}
///
/// Overrides the current step reward of the agent and updates the episode
/// reward accordingly.
///
///
/// This function replaces any rewards given to the agent during the current step.
/// Use to incrementally change the reward rather than
/// overriding it.
///
/// Typically, you assign rewards in the Agent subclass's
/// implementation after carrying out the received action and evaluating its success.
///
/// Rewards are used during reinforcement learning; they are ignored during inference.
///
/// See [Agents - Rewards] for general advice on implementing rewards and [Reward Signals]
/// for information about mixing reward signals from curiosity and Generative Adversarial
/// Imitation Learning (GAIL) with rewards supplied through this method.
///
/// [Agents - Rewards]: https://github.com/Unity-Technologies/ml-agents/blob/release_2_docs/docs/Learning-Environment-Design-Agents.md#rewards
/// [Reward Signals]: https://github.com/Unity-Technologies/ml-agents/blob/release_2_docs/docs/ML-Agents-Overview.md#a-quick-note-on-reward-signals
///
/// The new value of the reward.
public void SetReward(float reward)
{
#if DEBUG
Utilities.DebugCheckNanAndInfinity(reward, nameof(reward), nameof(SetReward));
#endif
m_CumulativeReward += (reward - m_Reward);
m_Reward = reward;
}
///
/// Increments the step and episode rewards by the provided value.
///
/// Use a positive reward to reinforce desired behavior. You can use a
/// negative reward to penalize mistakes. Use to
/// set the reward assigned to the current step with a specific value rather than
/// increasing or decreasing it.
///
/// Typically, you assign rewards in the Agent subclass's
/// implementation after carrying out the received action and evaluating its success.
///
/// Rewards are used during reinforcement learning; they are ignored during inference.
///
/// See [Agents - Rewards] for general advice on implementing rewards and [Reward Signals]
/// for information about mixing reward signals from curiosity and Generative Adversarial
/// Imitation Learning (GAIL) with rewards supplied through this method.
///
/// [Agents - Rewards]: https://github.com/Unity-Technologies/ml-agents/blob/release_2_docs/docs/Learning-Environment-Design-Agents.md#rewards
/// [Reward Signals]: https://github.com/Unity-Technologies/ml-agents/blob/release_2_docs/docs/ML-Agents-Overview.md#a-quick-note-on-reward-signals
///
/// Incremental reward value.
public void AddReward(float increment)
{
#if DEBUG
Utilities.DebugCheckNanAndInfinity(increment, nameof(increment), nameof(AddReward));
#endif
m_Reward += increment;
m_CumulativeReward += increment;
}
///
/// Retrieves the episode reward for the Agent.
///
/// The episode reward.
public float GetCumulativeReward()
{
return m_CumulativeReward;
}
void UpdateRewardStats()
{
var gaugeName = $"{m_PolicyFactory.BehaviorName}.CumulativeReward";
TimerStack.Instance.SetGauge(gaugeName, GetCumulativeReward());
}
///
/// Sets the done flag to true and resets the agent.
///
///
public void EndEpisode()
{
NotifyAgentDone(DoneReason.DoneCalled);
_AgentReset();
}
///
/// Requests a new decision for this agent.
///
///
/// Call `RequestDecision()` whenever an agent needs a decision. You often
/// want to request a decision every environment step. However, if an agent
/// cannot use the decision every step, then you can request a decision less
/// frequently.
///
/// You can add a component to the agent's
/// [GameObject] to drive the agent's decision making. When you use this component,
/// do not call `RequestDecision()` separately.
///
/// Note that this function calls ; you do not need to
/// call both functions at the same time.
///
/// [GameObject]: https://docs.unity3d.com/Manual/GameObjects.html
///
public void RequestDecision()
{
m_RequestDecision = true;
RequestAction();
}
///
/// Requests an action for this agent.
///
///
/// Call `RequestAction()` to repeat the previous action returned by the agent's
/// most recent decision. A new decision is not requested. When you call this function,
/// the Agent instance invokes with the
/// existing action vector.
///
/// You can use `RequestAction()` in situations where an agent must take an action
/// every update, but doesn't need to make a decision as often. For example, an
/// agent that moves through its environment might need to apply an action to keep
/// moving, but only needs to make a decision to change course or speed occasionally.
///
/// You can add a component to the agent's
/// [GameObject] to drive the agent's decision making and action frequency. When you
/// use this component, do not call `RequestAction()` separately.
///
/// Note that calls `RequestAction()`; you do not need to
/// call both functions at the same time.
///
/// [GameObject]: https://docs.unity3d.com/Manual/GameObjects.html
///
public void RequestAction()
{
m_RequestAction = true;
}
/// Helper function that resets all the data structures associated with
/// the agent. Typically used when the agent is being initialized or reset
/// at the end of an episode.
void ResetData()
{
var param = m_PolicyFactory.BrainParameters;
m_ActionMasker = new DiscreteActionMasker(param);
// If we haven't initialized vectorActions, initialize to 0. This should only
// happen during the creation of the Agent. In subsequent episodes, vectorAction
// should stay the previous action before the Done(), so that it is properly recorded.
if (m_Action.vectorActions == null)
{
m_Action.vectorActions = new float[param.NumActions];
m_Info.storedVectorActions = new float[param.NumActions];
}
}
///
/// Implement `Initialize()` to perform one-time initialization or set up of the
/// Agent instance.
///
///
/// `Initialize()` is called once when the agent is first enabled. If, for example,
/// the Agent object needs references to other [GameObjects] in the scene, you
/// can collect and store those references here.
///
/// Note that is called at the start of each of
/// the agent's "episodes". You can use that function for items that need to be reset
/// for each episode.
///
/// [GameObject]: https://docs.unity3d.com/Manual/GameObjects.html
///
public virtual void Initialize() {}
///
/// Implement `Heuristic()` to choose an action for this agent using a custom heuristic.
///
///
/// Implement this function to provide custom decision making logic or to support manual
/// control of an agent using keyboard, mouse, or game controller input.
///
/// Your heuristic implementation can use any decision making logic you specify. Assign decision
/// values to the float[] array, , passed to your function as a parameter.
/// Add values to the array at the same indexes as they are used in your
/// function, which receives this array and
/// implements the corresponding agent behavior. See [Actions] for more information
/// about agent actions.
///
/// An agent calls this `Heuristic()` function to make a decision when you set its behavior
/// type to . The agent also calls this function if
/// you set its behavior type to when the
/// is not connected to an external training process and you do not
/// assign a trained model to the agent.
///
/// To perform imitation learning, implement manual control of the agent in the `Heuristic()`
/// function so that you can record the demonstrations required for the imitation learning
/// algorithms. (Attach a [Demonstration Recorder] component to the agent's [GameObject] to
/// record the demonstration session to a file.)
///
/// Even when you don’t plan to use heuristic decisions for an agent or imitation learning,
/// implementing a simple heuristic function can aid in debugging agent actions and interactions
/// with its environment.
///
/// [Demonstration Recorder]: https://github.com/Unity-Technologies/ml-agents/blob/release_2_docs/docs/Learning-Environment-Design-Agents.md#recording-demonstrations
/// [Actions]: https://github.com/Unity-Technologies/ml-agents/blob/release_2_docs/docs/Learning-Environment-Design-Agents.md#actions
/// [GameObject]: https://docs.unity3d.com/Manual/GameObjects.html
///
///
/// The following example illustrates a `Heuristic()` function that provides WASD-style
/// keyboard control for an agent that can move in two dimensions as well as jump. See
/// [Input Manager] for more information about the built-in Unity input functions.
/// You can also use the [Input System package], which provides a more flexible and
/// configurable input system.
///
/// public override void Heuristic(float[] actionsOut)
/// {
/// actionsOut[0] = Input.GetAxis("Horizontal");
/// actionsOut[1] = Input.GetKey(KeyCode.Space) ? 1.0f : 0.0f;
/// actionsOut[2] = Input.GetAxis("Vertical");
/// }
///
/// [Input Manager]: https://docs.unity3d.com/Manual/class-InputManager.html
/// [Input System package]: https://docs.unity3d.com/Packages/com.unity.inputsystem@1.0/manual/index.html
///
/// Array for the output actions.
///
public virtual void Heuristic(float[] actionsOut)
{
Debug.LogWarning("Heuristic method called but not implemented. Returning placeholder actions.");
Array.Clear(actionsOut, 0, actionsOut.Length);
}
///
/// Set up the list of ISensors on the Agent. By default, this will select any
/// SensorComponent's attached to the Agent.
///
internal void InitializeSensors()
{
if (m_PolicyFactory.ObservableAttributeHandling != ObservableAttributeOptions.Ignore)
{
var excludeInherited =
m_PolicyFactory.ObservableAttributeHandling == ObservableAttributeOptions.ExcludeInherited;
using (TimerStack.Instance.Scoped("CreateObservableSensors"))
{
var observableSensors = ObservableAttribute.CreateObservableSensors(this, excludeInherited);
sensors.AddRange(observableSensors);
}
}
// Get all attached sensor components
SensorComponent[] attachedSensorComponents;
if (m_PolicyFactory.UseChildSensors)
{
attachedSensorComponents = GetComponentsInChildren();
}
else
{
attachedSensorComponents = GetComponents();
}
sensors.Capacity += attachedSensorComponents.Length;
foreach (var component in attachedSensorComponents)
{
sensors.Add(component.CreateSensor());
}
// Support legacy CollectObservations
var param = m_PolicyFactory.BrainParameters;
if (param.VectorObservationSize > 0)
{
collectObservationsSensor = new VectorSensor(param.VectorObservationSize);
if (param.NumStackedVectorObservations > 1)
{
var stackingSensor = new StackingSensor(
collectObservationsSensor, param.NumStackedVectorObservations);
sensors.Add(stackingSensor);
}
else
{
sensors.Add(collectObservationsSensor);
}
}
// Sort the Sensors by name to ensure determinism
sensors.Sort((x, y) => x.GetName().CompareTo(y.GetName()));
#if DEBUG
// Make sure the names are actually unique
for (var i = 0; i < sensors.Count - 1; i++)
{
Debug.Assert(
!sensors[i].GetName().Equals(sensors[i + 1].GetName()),
"Sensor names must be unique.");
}
#endif
}
///
/// Sends the Agent info to the linked Brain.
///
void SendInfoToBrain()
{
if (!m_Initialized)
{
throw new UnityAgentsException("Call to SendInfoToBrain when Agent hasn't been initialized." +
"Please ensure that you are calling 'base.OnEnable()' if you have overridden OnEnable.");
}
if (m_Brain == null)
{
return;
}
if (m_Info.done)
{
Array.Clear(m_Info.storedVectorActions, 0, m_Info.storedVectorActions.Length);
}
else
{
Array.Copy(m_Action.vectorActions, m_Info.storedVectorActions, m_Action.vectorActions.Length);
}
m_ActionMasker.ResetMask();
UpdateSensors();
using (TimerStack.Instance.Scoped("CollectObservations"))
{
CollectObservations(collectObservationsSensor);
}
using (TimerStack.Instance.Scoped("CollectDiscreteActionMasks"))
{
if (m_PolicyFactory.BrainParameters.VectorActionSpaceType == SpaceType.Discrete)
{
CollectDiscreteActionMasks(m_ActionMasker);
}
}
m_Info.discreteActionMasks = m_ActionMasker.GetMask();
m_Info.reward = m_Reward;
m_Info.done = false;
m_Info.maxStepReached = false;
m_Info.episodeId = m_EpisodeId;
m_Brain.RequestDecision(m_Info, sensors);
// If we have any DemonstrationWriters, write the AgentInfo and sensors to them.
foreach (var demoWriter in DemonstrationWriters)
{
demoWriter.Record(m_Info, sensors);
}
}
void UpdateSensors()
{
foreach (var sensor in sensors)
{
sensor.Update();
}
}
void ResetSensors()
{
foreach (var sensor in sensors)
{
sensor.Reset();
}
}
///
/// Implement `CollectObservations()` to collect the vector observations of
/// the agent for the step. The agent observation describes the current
/// environment from the perspective of the agent.
///
///
/// The vector observations for the agent.
///
///
/// An agent's observation is any environment information that helps
/// the agent achieve its goal. For example, for a fighting agent, its
/// observation could include distances to friends or enemies, or the
/// current level of ammunition at its disposal.
///
/// You can use a combination of vector, visual, and raycast observations for an
/// agent. If you only use visual or raycast observations, you do not need to
/// implement a `CollectObservations()` function.
///
/// Add vector observations to the parameter passed to
/// this method by calling the helper methods:
/// -
/// -
/// -
/// -
/// -
/// -
/// -
/// -
///
/// You can use any combination of these helper functions to build the agent's
/// vector of observations. You must build the vector in the same order
/// each time `CollectObservations()` is called and the length of the vector
/// must always be the same. In addition, the length of the observation must
/// match the
/// attribute of the linked Brain, which is set in the Editor on the
/// **Behavior Parameters** component attached to the agent's [GameObject].
///
/// For more information about observations, see [Observations and Sensors].
///
/// [GameObject]: https://docs.unity3d.com/Manual/GameObjects.html
/// [Observations and Sensors]: https://github.com/Unity-Technologies/ml-agents/blob/release_2_docs/docs/Learning-Environment-Design-Agents.md#observations-and-sensors
///
public virtual void CollectObservations(VectorSensor sensor)
{
}
///
/// Returns a read-only view of the observations that were generated in
/// . This is mainly useful inside of a
/// method to avoid recomputing the observations.
///
/// A read-only view of the observations list.
public ReadOnlyCollection GetObservations()
{
return collectObservationsSensor.GetObservations();
}
///
/// Implement `CollectDiscreteActionMasks()` to collects the masks for discrete
/// actions. When using discrete actions, the agent will not perform the masked
/// action.
///
///
/// The action masker for the agent.
///
///
/// When using Discrete Control, you can prevent the Agent from using a certain
/// action by masking it with .
///
/// See [Agents - Actions] for more information on masking actions.
///
/// [Agents - Actions]: https://github.com/Unity-Technologies/ml-agents/blob/release_2_docs/docs/Learning-Environment-Design-Agents.md#actions
///
///
public virtual void CollectDiscreteActionMasks(DiscreteActionMasker actionMasker)
{
}
///
/// Implement `OnActionReceived()` to specify agent behavior at every step, based
/// on the provided action.
///
///
/// An action is passed to this function in the form of an array vector. Your
/// implementation must use the array to direct the agent's behavior for the
/// current step.
///
/// You decide how many elements you need in the action array to control your
/// agent and what each element means. For example, if you want to apply a
/// force to move an agent around the environment, you can arbitrarily pick
/// three values in the action array to use as the force components. During
/// training, the agent's policy learns to set those particular elements of
/// the array to maximize the training rewards the agent receives. (Of course,
/// if you implement a function, it must use the same
/// elements of the action array for the same purpose since there is no learning
/// involved.)
///
/// Actions for an agent can be either *Continuous* or *Discrete*. Specify which
/// type of action space an agent uses, along with the size of the action array,
/// in the of the agent's associated
/// component.
///
/// When an agent uses the continuous action space, the values in the action
/// array are floating point numbers. You should clamp the values to the range,
/// -1..1, to increase numerical stability during training.
///
/// When an agent uses the discrete action space, the values in the action array
/// are integers that each represent a specific, discrete action. For example,
/// you could define a set of discrete actions such as:
///
///
/// 0 = Do nothing
/// 1 = Move one space left
/// 2 = Move one space right
/// 3 = Move one space up
/// 4 = Move one space down
///
///
/// When making a decision, the agent picks one of the five actions and puts the
/// corresponding integer value in the action vector. For example, if the agent
/// decided to move left, the action vector parameter would contain an array with
/// a single element with the value 1.
///
/// You can define multiple sets, or branches, of discrete actions to allow an
/// agent to perform simultaneous, independent actions. For example, you could
/// use one branch for movement and another branch for throwing a ball left, right,
/// up, or down, to allow the agent to do both in the same step.
///
/// The action vector of a discrete action space contains one element for each
/// branch. The value of each element is the integer representing the chosen
/// action for that branch. The agent always chooses one action for each
/// branch.
///
/// When you use the discrete action space, you can prevent the training process
/// or the neural network model from choosing specific actions in a step by
/// implementing the
/// function. For example, if your agent is next to a wall, you could mask out any
/// actions that would result in the agent trying to move into the wall.
///
/// For more information about implementing agent actions see [Agents - Actions].
///
/// [Agents - Actions]: https://github.com/Unity-Technologies/ml-agents/blob/release_2_docs/docs/Learning-Environment-Design-Agents.md#actions
///
///
/// An array containing the action vector. The length of the array is specified
/// by the of the agent's associated
/// component.
///
public virtual void OnActionReceived(float[] vectorAction) {}
///
/// Implement `OnEpisodeBegin()` to set up an Agent instance at the beginning
/// of an episode.
///
///
///
public virtual void OnEpisodeBegin() {}
///
/// Returns the last action that was decided on by the Agent.
///
///
/// The last action that was decided by the Agent (or null if no decision has been made).
///
///
public float[] GetAction()
{
return m_Action.vectorActions;
}
///
/// An internal reset method that updates internal data structures in
/// addition to calling .
///
void _AgentReset()
{
ResetData();
m_StepCount = 0;
OnEpisodeBegin();
}
///
/// Scales continuous action from [-1, 1] to arbitrary range.
///
/// The input action value.
/// The minimum output value.
/// The maximum output value.
/// The scaled from [-1,1] to
/// [, ].
protected static float ScaleAction(float rawAction, float min, float max)
{
var middle = (min + max) / 2;
var range = (max - min) / 2;
return rawAction * range + middle;
}
///
/// Signals the agent that it must send its decision to the brain.
///
void SendInfo()
{
// If the Agent is done, it has just reset and thus requires a new decision
if (m_RequestDecision)
{
SendInfoToBrain();
m_Reward = 0f;
m_RequestDecision = false;
}
}
void AgentIncrementStep()
{
m_StepCount += 1;
}
/// Used by the brain to make the agent perform a step.
void AgentStep()
{
if ((m_RequestAction) && (m_Brain != null))
{
m_RequestAction = false;
OnActionReceived(m_Action.vectorActions);
}
if ((m_StepCount >= MaxStep) && (MaxStep > 0))
{
NotifyAgentDone(DoneReason.MaxStepReached);
_AgentReset();
}
}
void DecideAction()
{
if (m_Action.vectorActions == null)
{
ResetData();
}
var action = m_Brain?.DecideAction();
if (action == null)
{
Array.Clear(m_Action.vectorActions, 0, m_Action.vectorActions.Length);
}
else
{
Array.Copy(action, m_Action.vectorActions, action.Length);
}
}
}
}