Unity-Robotics-Hub/tutorials/ros_unity_integration/network.md

ROS–Unity Integration Networking

Table of Contents

• Definitions
• Communicaton Minimum Requirements
  • If Using Docker
  • Explicitly Setting UNITY_IP
• Troubleshoooting
  • Where Does Communication Break Down
    • 1. Can Unity send messages to ROS?
    • 2. Can ROS send messages to Unity?
  • Open Port on Windows Firewalll

Definitions

ROS_IP : The IP address of the machine, VM, or container running ROS.

It is possible to set both of these variables on the machines running Unity and ROS. The specifics of where and why each of these settings will be described below.

On the ROS machine these settings are set as a rosparam and will typically be set in a launch file like this or in a param file loaded by a launch file like this. The param file can also be loaded manually by running the rosparam load params.yaml command.

On the Unity machine these settings are set from the menu by going to Robotics -> ROS Settings

Communication Minimum Requirements

The minimum settings required for Unity to communicate with ROS is to set the ROS_IP on the ROS side in a launch file and on the Unity side in Robotics -> ROS Settings.

If Using Docker

The container will need to be started with the following arguments to forward the ports used for communication between ROS and Unity.

-p 10000:10000 -p 5005:5005

• On the ROS side, set ROS_IP to 0.0.0.0.

• On the Unity side, set ROS_IP to 127.0.0.1.

Troubleshooting

Where Does Communication Break Down

1. Can Unity send messages to ROS?

When play is pressed in the Editor, a handshake message is sent from Unity to ROS.

If Unity can communicate with ROS, the following message should be printed to the console screen running the server_endpoint.py script.

[UnityTcpSender]: ROS-Unity Handshake received, will connect to UNITY_IP_ADDRESS:5005

With the corresponding response message printed to the Unity console,

ROS-Unity server listening on UNITY_IP_ADDRESS:5005

If the previous message is not shown and either of the following errors are thrown instead:

SocketException: A connection attempt failed because the connected party did not respond after a period of time, or established connection failed because connected host has failed to respond.

SocketException: Connection refused

Confirm that:

• server_endpoint is running
• You can ping ROS machine from Unity machine
  • From a terminal on the Unity machine, run the following command to confirm whether the ROS machine is reachable over the network. ping ROS_IP

If issue still persists:

• Confirm your IP addresses
• If on Windows you may need to open ports for the firewall.

2. Can ROS send messages to Unity?

After it is confirmed that Unity can communicate with ROS, publish a message to a ROS topic to which Unity has instantiated a subscriber.

If an error is thrown in the server_endpoint console then ROS cannot connect to Unity.

If issue still persists:

• Confirm your IP addresses
• Explicitly set the UNITY_IP
• If on Windows you may need to open ports for the firewall.

Open port on Windows Firewall

• Open port in Windows Firewall by opening Windows Defender Firewall then selecting Action -> New Rule...
  • Port 10000 will need to be added as an outbound rule
  • Port 5005 will need to obe added as an inbound rule

In some instances opening a port did not resolve the communication issues and the Unity Editor had to be allowed through the firewall

• Allow the Editor through the firewall by opening Windows Defender Firewall -> Allowed Apps and then modifying the settings for the Unity Editor to allow communication on private and public networks.