本演示项目在Unity for Android Build中启用部分华为HMS和AGC服务,对应的类和函数的名称和用法相同。
您最多选择25个主题 主题必须以中文或者字母或数字开头,可以包含连字符 (-),并且长度不得超过35个字符

17 KiB

Location Kit (HMS)

Service Introduction

Location Kit combines the Global Navigation Satellite System (GNSS), Wi-Fi, and base station location functionalities into your app to build up global positioning capabilities, allowing you to provide flexible location-based services for global users. Currently, it provides three main capabilities: fused location, activity identification, and geofence. You can call one or more of these capabilities as needed.

  • Fused location: Provides a set of easy-to-use APIs for your app to quickly obtain the device location based on the GNSS, Wi-Fi, and base station location data.

  • Activity identification: Identifies user activity status through the acceleration sensor, cellular network information, and magnetometer, helping you adapt your app to user behavior.

  • Geofence: Allows you to set an interested area through an API so that your app can receive a notification when a specified action (such as leaving, entering, or staying in the area) occurs.

Use Cases

Fused Location

If your app needs to obtain the device location, you need to apply for the location permission for your app, call the requestLocationUpdates method of Location Kit, set request parameters in LocationRequest, and specify a location mode as needed. To stop obtaining location information, call the removeLocationUpdates method.

NOTE:
The fused location function uses the WGS-84 coordinate system for the returned locations.

Activity Identification

Your app can obtain the activity status (such as walking, running, or cycling) of a device in either of the following methods:

  • Method 1: Call the createActivityIdentificationUpdates method to proactively obtain the current device activity status. In this method, you can set the interval (in milliseconds) for detecting activity identification updates. Larger values will result in fewer activity detections, and smaller values will result in more activity detections. To stop requesting activity identification updates, call the deleteActivityIdentificationUpdates method.

  • Method 2: Call the createActivityConversionUpdates method to detect activity conversion updates of the current device. The interval for detecting activity conversion updates is 5 seconds when the screen is on and 200 seconds when the screen is off. You can select an activity status for detection. For details about all activity statuses, please refer to Constant-values. To stop requesting activity conversion updates, call the deleteActivityConversionUpdatesmethod.

Geofence

You can call the createGeofenceList method to create a geofence based on the location that is of interest. Then, Location Kit can sense the distance between the current device location and the geofence. When the device enters the geofence, a notification will be sent to your app. In addition, Location Kit can detect the duration during which the device stays in the geofence, and send a notification to your app if the stay duration reaches your preset limit.

You can also create a geofence by dragging to select an area on the map and setting relevant parameters. For details, please refer to Server Development.

Integrating into Your Unity Project

Register and get verified

Before doing this step, you need to create an HMS Account, project and App according to the HMS document.

Images/hms/Step1.png

Images/hms/Preparation.png

Now you have your Huawei HMS Project and App information.

Create an app

Create Unity project, and you will also need to set up the build environment for building Android apk with HMS SDK. Then, finish the following preparation.

Images/hms/Step2.png

In Editor -> Build Settings, Switch platform to Andriod and Connect your Android device

Images/hms/BuildSettings

In Player Settings -> Publishing Settings, enable the following environment checkboxes

Images/hms/BuildEnvironment

Prepare for development

According to HMS integration process introduction, we still need to add some configurations to the gradle files for development preparations.

Images/hms/Step3.png

You can follow Huawei documentation guidance to do the configuration, you can also refer and compare with the files in our Unity example project.

  1. Enable and add configurations to AndroidManifest.xml

    Go to Edit -> Project Settings -> Player -> Android(icon) -> Publishing Settings -> Build

    Enable Custom Main Manifest

    We should enable AndroidManifest when we use push or location sdk.

    If Unity Version is 2019.2 or before, there is no AndroidManifest checkbox, but you can put AndroidManifest.xml under Assets/Plugins/Android.

        <?xml version="1.0" encoding="utf-8"?>
        <!-- GENERATED BY UNITY. REMOVE THIS COMMENT TO PREVENT OVERWRITING WHEN EXPORTING AGAIN-->
        <manifest
            xmlns:android="http://schemas.android.com/apk/res/android"
            package="com.unity3d.player"
            xmlns:tools="http://schemas.android.com/tools">
            <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION"/>
            <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION"/>
            <uses-permission android:name="android.permission.ACCESS_BACKGROUND_LOCATION" />
            <uses-permission android:name="com.huawei.hms.permission.ACTIVITY_RECOGNITION" />
            <uses-permission android:name="android.permission.ACTIVITY_RECOGNITION" />
            <uses-permission android:name="android.permission.ACCESS_MOCK_LOCATION" />
            <application>
                <activity android:name="com.hms.hms_analytic_activity.HmsAnalyticActivity"
                        android:theme="@style/UnityThemeSelector">
                    <intent-filter>
                        <action android:name="android.intent.action.MAIN" />
                        <category android:name="android.intent.category.LAUNCHER" />
                    </intent-filter>
                    <meta-data android:name="unityplayer.UnityActivity" android:value="true" />
                </activity>
                <service
                    android:name="com.unity.hms.push.MyPushService"
                    android:exported="false">
                    <intent-filter>
                        <action android:name="com.huawei.push.action.MESSAGING_EVENT"/>
                    </intent-filter>
                </service>
                <receiver
                        android:name="com.unity.hms.location.LocationBroadcastReceiver"
                        android:exported="true">
                    <intent-filter>
                        <action android:name="com.huawei.hmssample.location.LocationBroadcastReceiver.ACTION_PROCESS_LOCATION" />
                    </intent-filter>
                </receiver>
                <receiver
                        android:name="com.unity.hms.location.GeoFenceBroadcastReceiver"
                        android:exported="true">
                    <intent-filter>
                        <action android:name="com.huawei.hmssample.geofence.GeoFenceBroadcastReceiver.ACTION_PROCESS_LOCATION" />
                    </intent-filter>
                </receiver>
            </application>
        </manifest>
    
  2. Enable and add configurations to project gradle

    Go to Edit -> Project Settings -> Player -> Android(icon) -> Publishing Settings -> Build

    Enable Custom Base Gradle Template and add the AppGallery Connect plugin and the Maven repository. The path is Assets/Plugins/Android/baseProjectTemplate.gradle.

    If your unity version is 2019.2 or before, you should add implement and other configuration on MainGradleTemplate.gradle.

        // GENERATED BY UNITY. REMOVE THIS COMMENT TO PREVENT OVERWRITING WHEN EXPORTING AGAIN
       
        allprojects {
            buildscript {
                repositories {**ARTIFACTORYREPOSITORY**
                    google()
                    jcenter()
                    maven { url 'https://developer.huawei.com/repo/' }
                }
       
                dependencies {
                    // If you are changing the Android Gradle Plugin version, make sure it is compatible with the Gradle version preinstalled with Unity
                    // See which Gradle version is preinstalled with Unity here https://docs.unity3d.com/Manual/android-gradle-overview.html
                    // See official Gradle and Android Gradle Plugin compatibility table here https://developer.android.com/studio/releases/gradle-plugin#updating-gradle
                    // To specify a custom Gradle version in Unity, go do "Preferences > External Tools", uncheck "Gradle Installed with Unity (recommended)" and specify a path to a custom Gradle version
                    classpath 'com.android.tools.build:gradle:3.4.0'
                    classpath 'com.huawei.agconnect:agcp:1.2.1.301'
                    **BUILD_SCRIPT_DEPS**
                }
            }
       
            repositories {**ARTIFACTORYREPOSITORY**
                google()
                jcenter()
                flatDir {
                    dirs "${project(':unityLibrary').projectDir}/libs"
                }
                maven { url 'https://developer.huawei.com/repo/' }
            }
        }
       
        task clean(type: Delete) {
            delete rootProject.buildDir
        }
    
  3. Enable and add configurations to app gradle

    Go to Edit -> Project Settings -> Player -> Android(icon) -> Publishing Settings -> Build

    Enable Custom Launcher Gradle Template and add build dependencies in launcherTemplate.gradle. The path is Assets/Plugins/Android/launcherTmeplate.gradle.

    If unity version is 2019.2 or before, you should add implement and other configuration on MainGradleTemplate.

        dependencies {
            implementation project(':unityLibrary')
            implementation 'com.huawei.hms:location:5.0.0.302'
            implementation 'com.android.support:appcompat-v7:28.0.0'
            implementation 'com.huawei.hms:base:4.0.1.300'
            implementation 'com.huawei.hms:hwid:4.0.1.300'
            }
    
  4. Enable and add configurations to unity library gradle

    Go to Edit -> Project Settings -> Player -> Android(icon) -> Publishing Settings -> Build

    Enable Custom Main Gradle Template and add build dependencies. The path is Assets/Plugins/Android/mainTemplate.gradle.

    If unity version is 2019.2 or before, you should add implement and other configuration on MainGradleTemplate.gradle.

    dependencies {
        implementation fileTree(dir: 'libs', include: ['*.jar'])
        implementation 'com.huawei.hms:hianalytics:5.0.0.301'
        implementation 'com.huawei.agconnect:agconnect-core:1.2.0.300'
        implementation 'com.huawei.hms:base:4.0.1.300'
        implementation 'com.huawei.hms:hwid:4.0.1.300'
        implementation 'com.huawei.hms:game:4.0.1.300'
    **DEPS**}
    
  5. Signature

    Go to Edit -> Project Settings -> Player -> Android(icon) -> Publishing Settings -> Keystore Manager

    Click Keytore... -> create new

    Images/hms/Keystore.png

    You need to enter the password when you open unity, otherwise you cannot build. There's no need to add a signature on gradle.

  6. Signing Certificate Fingerprint

    Please refer to Huawei preparation documentation step 4 for generating a SHA256 Certificate Fingerprint.

    Images/hms/Fingerprint.png

    And refer to Huawei preparation documentation step 5 to add Fingerprint to AppGallery Connect.

    Images/hms/FingerprintAppGallery.png

  7. Package name

    Set the package name in Edit -> Project Settings -> Player

    The package name is com.${Company Name}.${Product Name}.

    You can also complete the rest of the settings here, such as version number, icons, resolution, etc.

    Images/hms/PackageName.png

  8. agconnect-services.json

    We should put the json file under Assets/Plugins/Android.

    Add this following message into the json file downloaded from your Huawei developer dashboard. Also, you can refer to that file in our Unity example project.

    "agcgw":{
    "backurl":"connect-drcn.dbankcloud.cn",
    "url":"connect-drcn.hispace.hicloud.com"
    },
    

    You can refer to this link to create agconnect-services.json.

    Images/hms/AgcConnectServicesJson.png

  9. Get activity

    For getting the activity, you can use the Common.GetActivity() function.

Developing with the SDK

Developing

There are corresponding example scenes in the example project for all 4 Kits. For testing, you will need to build it onto Android mobile build by HMS. Make sure you have already created your HMS account and project. Then, you can change the configuration and test different functions.

Images/hms/Step4.png

We need to add implentment com.android.support:appcompat-v7:28.0.0 to launcherTemplate.

In the example project, the corresponding scene for Location Kit is Assets/HuaweiServiceDemo/Scenes/HmsLocationSampleScene.unity and the code is Assets/HuaweiServiceDemo/Scripts/test/location/LocationTest.cs.

We need to set receiver.

  • LocationBroadcastReceiver

    1. Implement interface IBroadcastReceiver

    2. Get Receiver by method BroadcastRegister.CreateLocationReceiver

    3. Add the following code to AndroidManifest.xml

      <application>
          ...
          <receiver
                  android:name="com.unity.hms.location.LocationBroadcastReceiver"
                  android:exported="true">
              <intent-filter>
                  <action android:name=`${Your action name}` />
              </intent-filter>
          </receiver>
          ...
      </application>
      

      android:name is fixed.

      You can set the value of action android:name. But the value should be the same as the parameter of intent.setAction.

  • GeoFenceReceiver

    1. Implement interface IBroadcastReceiver

    2. Get Receiver by method BroadcastRegister.CreateGeoFenceReceiver

    3. Add the following code to AndroidManifest.xml

      <application>
          ...
          <receiver
                  android:name="com.unity.hms.location.GeoFenceBroadcastReceiver"
                  android:exported="true">
              <intent-filter>
                  <action android:name=`${Your action name}` />
              </intent-filter>
          </receiver>
          ...
      </application>
      

      android:name is fixed.

      You can set the value of action android:name. But the value should be the same as the parameter of intent.setAction.

Test & Release

Please refer to Huawei integration procedure for testing and releasing.

Images/hms/TestAndRelease.png

Images/hms/TestingReleasing.png