Shader "BoatAttack/LWVegetationShader" { Properties { // Specular vs Metallic workflow [HideInInspector] _WorkflowMode("WorkflowMode", Float) = 1.0 _Color("Color", Color) = (1,1,1,1) _MainTex("Albedo", 2D) = "white" {} _Cutoff("Alpha Cutoff", Range(0.0, 1.0)) = 0.5 _Glossiness("Smoothness", Range(0.0, 1.0)) = 0.5 _GlossMapScale("Smoothness Scale", Range(0.0, 1.0)) = 1.0 _SmoothnessTextureChannel("Smoothness texture channel", Float) = 0 [Gamma] _Metallic("Metallic", Range(0.0, 1.0)) = 0.0 _MetallicGlossMap("Metallic", 2D) = "white" {} _SpecColor("Specular", Color) = (0.2, 0.2, 0.2) _SpecGlossMap("Specular", 2D) = "white" {} [ToggleOff] _SpecularHighlights("Specular Highlights", Float) = 1.0 [ToggleOff] _GlossyReflections("Glossy Reflections", Float) = 1.0 _BumpScale("Scale", Float) = 1.0 _BumpMap("Normal Map", 2D) = "bump" {} _OcclusionStrength("Strength", Range(0.0, 1.0)) = 1.0 _OcclusionMap("Occlusion", 2D) = "white" {} _EmissionColor("Color", Color) = (0,0,0) _EmissionMap("Emission", 2D) = "white" {} // Blending state [HideInInspector] _Mode("__mode", Float) = 0.0 [HideInInspector] _SrcBlend("__src", Float) = 1.0 [HideInInspector] _DstBlend("__dst", Float) = 0.0 [HideInInspector] _ZWrite("__zw", Float) = 1.0 } SubShader { // Lightweight Pipeline tag is required. If Lightweight pipeline is not set in the graphics settings // this Subshader will fail. One can add a subshader below or fallback to Standard built-in to make this // material work with both Lightweight Pipeline and Builtin Unity Pipeline Tags{"RenderType" = "Opaque" "RenderPipeline" = "LightweightPipeline"} // ------------------------------------------------------------------ // Base forward pass (directional light, emission, lightmaps, ...) Pass { // Lightmode matches the ShaderPassName set in LightweightPipeline.cs. SRPDefaultUnlit and passes with // no LightMode tag are also rendered by Lightweight Pipeline Tags{"LightMode" = "LightweightForward"} Blend[_SrcBlend][_DstBlend] ZWrite[_ZWrite] Cull Off HLSLPROGRAM // Required to compile gles 2.0 with standard SRP library // All shaders must be compiled with HLSLcc and currently only gles is not using HLSLcc by default #pragma prefer_hlslcc gles #pragma target 3.0 // ------------------------------------- // Material Keywords #pragma shader_feature _NORMALMAP #pragma shader_feature _ _ALPHATEST_ON _ALPHABLEND_ON _ALPHAPREMULTIPLY_ON #pragma shader_feature _EMISSION #pragma shader_feature _METALLICSPECGLOSSMAP #pragma shader_feature _SMOOTHNESS_TEXTURE_ALBEDO_CHANNEL_A #pragma shader_feature _OCCLUSIONMAP #pragma shader_feature _SPECULARHIGHLIGHTS_OFF #pragma shader_feature _GLOSSYREFLECTIONS_OFF #pragma shader_feature _SPECULAR_SETUP // ------------------------------------- // Lightweight Pipeline keywords #pragma multi_compile _ _ADDITIONAL_LIGHTS #pragma multi_compile _ _VERTEX_LIGHTS #pragma multi_compile _ _MIXED_LIGHTING_SUBTRACTIVE #pragma multi_compile _ FOG_LINEAR FOG_EXP2 // ------------------------------------- // Unity defined keywords #pragma multi_compile _ DIRLIGHTMAP_COMBINED #pragma multi_compile _ LIGHTMAP_ON //-------------------------------------- // GPU Instancing #pragma multi_compile_instancing // LW doesn't support dynamic GI. So we save 30% shader variants if we assume // LIGHTMAP_ON when DIRLIGHTMAP_COMBINED is set #ifdef DIRLIGHTMAP_COMBINED #define LIGHTMAP_ON #endif // Including the following two function is enought for shading with Lightweight Pipeline. Everything is included in them. // Core.hlsl will include SRP shader library, all constant buffers not related to materials (perobject, percamera, perframe). // It also includes matrix/space conversion functions and fog. // Lighting.hlsl will include the light functions/data to abstract light constants. You should use GetMainLight and GetLight functions // that initialize Light struct. Lighting.hlsl also include GI, Light BDRF functions. It also includes Shadows. #include "LWRP/ShaderLibrary/Core.hlsl" #include "LWRP/ShaderLibrary/Lighting.hlsl" #pragma vertex VegetationVertex #pragma fragment LitPassFragment float4 SmoothCurve( float4 x ) { return x * x *( 3.0 - 2.0 * x ); } float4 TriangleWave( float4 x ) { return abs( frac( x + 0.5 ) * 2.0 - 1.0 ); } float4 SmoothTriangleWave( float4 x ) { return SmoothCurve( TriangleWave( x ) ); } struct LightweightVertexInput { float4 vertex : POSITION; float3 normal : NORMAL; float4 tangent : TANGENT; float2 texcoord : TEXCOORD0; float2 lightmapUV : TEXCOORD1; float4 color : COLOR; UNITY_VERTEX_INPUT_INSTANCE_ID }; struct VegetationVertexOutput { float3 uv : TEXCOORD0;//z holds vert AO float4 lightmapUVOrVertexSH : TEXCOORD1; // holds either lightmapUV or vertex SH. depending on LIGHTMAP_ON float3 positionWS : TEXCOORD2; half3 normal : TEXCOORD3; #if _NORMALMAP half3 tangent : TEXCOORD4; half3 binormal : TEXCOORD5; #endif half3 viewDir : TEXCOORD6; half4 fogFactorAndVertexLight : TEXCOORD7; // x: fogFactor, yzw: vertex light float4 clipPos : SV_POSITION; UNITY_VERTEX_INPUT_INSTANCE_ID }; // Not required but included here for simplicity. This defines all material related constants for the Standard surface shader like _Color, _MainTex, and so on. // These are specific to this shader. You should define your own constants. #include "LWRP/ShaderLibrary/InputSurface.hlsl" UNITY_INSTANCING_BUFFER_START(Props) UNITY_DEFINE_INSTANCED_PROP(half4, _Position) UNITY_INSTANCING_BUFFER_END(Props) //vert VegetationVertexOutput VegetationVertex(LightweightVertexInput v) { VegetationVertexOutput o = (VegetationVertexOutput)0; UNITY_SETUP_INSTANCE_ID(v); UNITY_TRANSFER_INSTANCE_ID(v, o); // Pretty much same as builtin Unity shader library. o.uv.xy = TRANSFORM_TEX(v.texcoord, _MainTex); // SRP shader library adds some functions to convert between spaces. // TransformObjectToHClip and some other functions are defined. o.positionWS = TransformObjectToWorld(v.vertex.xyz); o.clipPos = TransformWorldToHClip(o.positionWS); /////////////////////////////////////vegetation stuff////////////////////////////////////////////////// //half phaseOffset = UNITY_ACCESS_INSTANCED_PROP(Props, _PhaseOffset); float4 objectOrigin = UNITY_ACCESS_INSTANCED_PROP(Props, _Position); ///////Main Bending float fBendScale = 0.05;//main bend opacity float fLength = length(v.vertex.xyz);//distance to origin float2 vWind = float2(sin(_Time.y + objectOrigin.x) * 0.1, sin(_Time.y + objectOrigin.z) * 0.1);//wind direction // Bend factor - Wind variation is done on the CPU. float fBF = v.vertex.y * fBendScale; // Smooth bending factor and increase its nearby height limit. fBF += 1.0; fBF *= fBF; fBF = fBF * fBF - fBF; // Displace position float3 vNewPos = v.vertex.xyz; vNewPos.xz += vWind.xy * fBF; // Rescale v.vertex.xyz = normalize(vNewPos.xyz) * fLength; ////////Detail blending float fSpeed = 0.25;//leaf occil float fDetailFreq = 0.3;//detail leaf occil float fEdgeAtten = v.color.x;//leaf stiffness(red) float fDetailAmp = 0.1;//leaf edge amplitude of movement float fBranchAtten = 1 - v.color.z;//branch stiffness(blue) float fBranchAmp = 1.5;//branch amplitude of movement float fBranchPhase = v.color.y * 3.3;//leaf phase(green) // Phases (object, vertex, branch) float fObjPhase = dot(objectOrigin.xyz, 1); fBranchPhase += fObjPhase; float fVtxPhase = dot(v.vertex.xyz, v.color.y + fBranchPhase); // x is used for edges; y is used for branches float2 vWavesIn = _Time.y + float2(fVtxPhase, fBranchPhase ); // 1.975, 0.793, 0.375, 0.193 are good frequencies float4 vWaves = (frac( vWavesIn.xxyy * float4(1.975, 0.793, 0.375, 0.193) ) * 2.0 - 1.0 ) * fSpeed * fDetailFreq; vWaves = SmoothTriangleWave( vWaves ); float2 vWavesSum = vWaves.xz + vWaves.yw; // Edge (xy) and branch bending (z) v.vertex.xyz += vWavesSum.xyx * float3(fEdgeAtten * fDetailAmp * v.normal.x, fBranchAtten * fBranchAmp, fEdgeAtten * fDetailAmp * v.normal.z); ////////////////////////////////////////////////////////////////////////////////////////////////////// o.positionWS = TransformObjectToWorld(v.vertex.xyz); o.clipPos = TransformWorldToHClip(o.positionWS); o.viewDir = SafeNormalize(_WorldSpaceCameraPos - o.positionWS); // initializes o.normal and if _NORMALMAP also o.tangent and o.binormal #ifdef _NORMALMAP OutputTangentToWorld(v.tangent, v.normal, o.tangent, o.binormal, o.normal); #else o.normal = TransformObjectToWorldNormal(v.normal); #endif // We either sample GI from lightmap or SH. lightmap UV and vertex SH coefficients // are packed in lightmapUVOrVertexSH to save interpolator. // The following funcions initialize OUTPUT_LIGHTMAP_UV(v.lightmapUV, unity_LightmapST, o.lightmapUVOrVertexSH); OUTPUT_SH(o.normal, o.lightmapUVOrVertexSH); half3 vertexLight = VertexLighting(o.positionWS, o.normal); half fogFactor = ComputeFogFactor(o.clipPos.z); o.fogFactorAndVertexLight = half4(fogFactor, vertexLight); return o; } //frag half4 LitPassFragment(VegetationVertexOutput IN, half facing : VFACE) : SV_Target { UNITY_SETUP_INSTANCE_ID(IN); SurfaceData surfaceData; InitializeStandardLitSurfaceData(IN.uv.xy, surfaceData); #if _NORMALMAP half3 normalWS = TangentToWorldNormal(surfaceData.normalTS, IN.tangent, IN.binormal, IN.normal); #else half3 normalWS = normalize(IN.normal); #endif half3 bakedGI = SampleSH(normalWS); BRDFData brdfData; InitializeBRDFData(surfaceData.albedo, surfaceData.metallic, surfaceData.specular, surfaceData.smoothness, surfaceData.alpha, brdfData); Light mainLight = GetMainLight(IN.positionWS); half3 color = GlobalIllumination(brdfData, bakedGI, surfaceData.occlusion, normalWS * facing, IN.viewDir); float fogFactor = IN.fogFactorAndVertexLight.x; color += LightingPhysicallyBased(brdfData, mainLight, normalWS * facing, IN.viewDir); // Computes fog factor per-vertex ApplyFog(color.rgb, fogFactor); return half4(color, surfaceData.alpha); } ENDHLSL } Pass { Tags{"LightMode" = "ShadowCaster"} ZWrite On ZTest LEqual HLSLPROGRAM // Required to compile gles 2.0 with standard srp library #pragma prefer_hlslcc gles #pragma target 2.0 // ------------------------------------- // Material Keywords #pragma shader_feature _NORMALMAP #pragma shader_feature _ _ALPHATEST_ON _ALPHABLEND_ON _ALPHAPREMULTIPLY_ON #pragma shader_feature _EMISSION #pragma shader_feature _METALLICSPECGLOSSMAP #pragma shader_feature _SMOOTHNESS_TEXTURE_ALBEDO_CHANNEL_A #pragma shader_feature _OCCLUSIONMAP #pragma shader_feature _SPECULARHIGHLIGHTS_OFF #pragma shader_feature _GLOSSYREFLECTIONS_OFF #pragma shader_feature _SPECULAR_SETUP //-------------------------------------- // GPU Instancing #pragma multi_compile_instancing #pragma vertex ShadowPassVertex #pragma fragment LitPassFragmentNull #include "LWRP/ShaderLibrary/LightweightPassShadow.hlsl" ENDHLSL } Pass { Tags{"LightMode" = "DepthOnly"} ZWrite On ColorMask 0 HLSLPROGRAM // Required to compile gles 2.0 with standard srp library #pragma prefer_hlslcc gles #pragma target 2.0 // ------------------------------------- // Material Keywords #pragma shader_feature _NORMALMAP #pragma shader_feature _ _ALPHATEST_ON _ALPHABLEND_ON _ALPHAPREMULTIPLY_ON #pragma shader_feature _EMISSION #pragma shader_feature _METALLICSPECGLOSSMAP #pragma shader_feature _SMOOTHNESS_TEXTURE_ALBEDO_CHANNEL_A #pragma shader_feature _OCCLUSIONMAP #pragma shader_feature _SPECULARHIGHLIGHTS_OFF #pragma shader_feature _GLOSSYREFLECTIONS_OFF #pragma shader_feature _SPECULAR_SETUP //-------------------------------------- // GPU Instancing #pragma multi_compile_instancing #pragma vertex LitPassVertex #pragma fragment LitPassFragmentNull #include "LWRP/ShaderLibrary/LightweightPassLit.hlsl" ENDHLSL } // This pass it not used during regular rendering, only for lightmap baking. Pass { Tags{"LightMode" = "Meta"} Cull Off HLSLPROGRAM // Required to compile gles 2.0 with standard srp library #pragma prefer_hlslcc gles #pragma vertex LightweightVertexMeta #pragma fragment LightweightFragmentMeta #pragma shader_feature _SPECULAR_SETUP #pragma shader_feature _EMISSION #pragma shader_feature _METALLICSPECGLOSSMAP #pragma shader_feature _ _SMOOTHNESS_TEXTURE_ALBEDO_CHANNEL_A #pragma shader_feature EDITOR_VISUALIZATION #pragma shader_feature _SPECGLOSSMAP #include "LWRP/ShaderLibrary/LightweightPassMeta.hlsl" ENDHLSL } } FallBack "Hidden/InternalErrorShader" CustomEditor "LightweightStandardGUI" }